Manual for VM018

Manual for VM018

Brand: Phonocar

Category: Car Multimedia System

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8:03 p.m.

Warranty Information

WARRANTY does NOT cover the problems/damage caused through improper use of the Unit.

  • Display Positioning: Control screen tilt using the ADJ button for optimal viewing angles (3 angles available). The display remembers its last position. Press and hold ADJ to return to the original position.
  • Front Panel Removal: Switch off the unit, press the expulsion button, and slide the front panel to the left.
  • CD Insertion: Rotate the front panel 90 degrees, insert the CD, and the panel will close automatically.
  • Remote Control: Basic functions include power, source selection, volume control, menu navigation, and media playback controls. Battery replacement requires a CR-2025 lithium battery and proper polarity.
  • Bluetooth Setup: Pair your phone by enabling Bluetooth on both devices, searching for the unit, and entering the security code (0000). Functions include making calls, answering, and ending calls.
  • Radio Operation: Select bands (FM1, FM2, FM3, AM1, AM2), tune manually or automatically, and store favorite stations. Features include AF (Alternative Frequency) and TA (Traffic Announcement).

Troubleshooting and error codes

Error MessageCauseSolution
No Disc / Bad DiscDisc is too dirtyClean or replace the disc
Disc inserted incorrectlyInsert the disc correctly
Unkown DiscDisc is not compatible with the unitEnsure the CD is clean for proper reading. If clean, the unit may not be able to reproduce the disc.
SymptomsCauseSolution
Remote control does not functionBattery is emptyReplace the battery
Battery not inserted correctlyInsert correctly
Audio connections are incorrectCorrect connections according to the diagram on page 4
No sound or weak soundVolume is set too lowAdjust the volume level
Audio channel output is not balancedCorrect audio channel output. Refer to audio control.
Memory lost after powering offACC and battery cables not connected correctlyCorrect connections as per the connection diagram on page 4
SymptomsCauseSolution
Anomalous display (e.g. lines on screen)DVD disc color system does not match monitorCorrect the color system of the DVD disc or monitor
Video cable is brokenReplace the cable
Video cable not connected correctlyConnect the video cable correctly
Distorted charactersUnit malfunctionTurn off the unit and turn it back on, or switch to a different mode and then back to the previous mode.
SymptomsCauseSolution
Weak radio receptionInternal connection is incorrectRefer to the connection diagram on page 4
SymptomsCauseSolution
Disc not playingDisc is scratchedReplace the disc
Disc is too dirty or wetClean the disc
Interruption during playbackDisc inserted incorrectlyInsert the disc correctly
MP3 track name not displayed correctlyMP3 name is not regularUse accepted characters
Cannot read USB filesUSB drive not compatibleReplace USB
USB drive needs formattingFormat USB
SymptomsCauseSolution
Disc cannot be playedDisc is scratchedReplace the disc
Disc is too dirty or wetClean the disc
Disc not compatible with the unitUse a compatible disc
Disc inserted incorrectlyInsert the disc correctly
Subtitles not visibleNo subtitle file on the discChange to a disc with subtitle files
Language and subtitles cannot be changedOnly one audio/subtitle track on the discChange to a disc with multi-audio or subtitles
Viewing angle does not changeOnly one viewing angle on the discChange to a multi-angle disc
Distorted imagesDisc is protected by copyrightCopying protected discs is illegal and some of them are not supported by the unit
PCB is invalid when playing a VCDDisc does not support PCBChange to a disc with PCB functions
Repeat playback or GOTO search is invalid when playing a VCDPCB is activeDeactivate PCB
Privacy Policy