Manual for PD-F907

Name: Manual for PD-F907
Brand: PIONEER
Availability: InStock

Brand: PIONEER

Category: Audio Player

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:30 p.m.

Warranty Information

Refer to the enclosed warranty card for details.

Loading Discs: Press STANDBY/ON, then UNLOAD. Load discs with the label side facing left. Press DISC (+/-) to rotate the rack. Press OPEN/CLOSE to close the hood.

Listening to Discs: Press STANDBY/ON. Press OPEN/CLOSE to load discs. Press PLAY/PAUSE to start playback. Use DISC SET and TRACK SET to select specific discs and tracks. MODE button selects play modes (ALL, SINGLE, CUSTOM).

Advanced Operations: Use CUSTOM play to program favorite discs. REPEAT plays tracks or discs repeatedly. RANDOM plays tracks in a random order. PROGRAM allows for creating a sequence of tracks. BEST stores favorite tracks. PREVIOUS scans recently played discs. HI-LITE scans 10-second portions of tracks. TIME displays playback time information.

Troubleshooting and error codes

Symptom	Cause	Remedy
No sound	Output cables are connected incorrectly or loosely. Incorrect operation of stereo amplifier. Pin plugs and/or amplifier terminals are dirty. Player is in pause mode. The disc is loaded with the label side rightward.	Connect properly. Check the settings of amplifier switches and sound volume controls. Clean away dirt. Press PLAY/PAUSE. Reload the disc with the label side leftward.
When playback is started, it stops immediately.	Disc is inserted in the wrong way. Smudges, etc., on the disc.	Insert the disc correctly with the label side leftward. Clean the smudges from the disc and then play it again.
Remote control will not function.	Dead batteries. Obstruction between player and remote control unit.	Replace batteries. Relocate remote control unit or remove obstruction.

SELF-DIAGNOSTICS FUNCTION

Service No.	Unit Status	Countermeasures
U1	The disc may not be loaded properly in the rack.	Reload the discs properly. (Insert only one disc in a slot.) Check if there is a foreign object attached onto the disc. Check if there is a foreign object in the rack.
U2	There is an operation error in the mechanical section.	Check if there is a foreign object in the rack. Unplug the power cord then plug it in again.
U3	There is an error related to the hood.	Check if the hood is caught by anything. Unplug the power cord then plug it in again.