Brand: PIONEER
Category: Audio Player
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SBX-D201
Uploaded: Nov. 21, 2025, 6:27 p.m.
Power ON
Press the STANDBY/ON button on the subwoofer or remote controller.
Power OFF
Press the STANDBY/ON button on the subwoofer or remote controller to set to Standby mode.
Select an input source
Press the AUX, BLUETOOTH, HDMI, or HDMI TV button on the remote controller to select the desired input source.
Adjust sound volume
Use the VOL +/– buttons on the remote controller to adjust the volume.
Mute temporarily/cancel muting
Press the MUTE button on the remote controller to mute or unmute the sound.
Select the sound mode
Press the MUSIC, CLEAR VOICE, or CINEMA button on the remote controller to select the desired sound mode.
Troubleshooting and error codes
| What you should check | Solutions and others | PAGE |
|---|---|---|
| The unit is uncontrollable | Reset the unit by unplugging it, waiting a minute, and plugging it back in. | 17 |
| Initialize SBX-D201 | Hold down the CLEAR VOICE button on the remote controller for over five seconds. | 17 |
| The unit cannot be powered on. | Check if the power cord or plug is disconnected. Connect a power cord with an AC adaptor. Insert a power plug into an outlet. | 13, 17 |
| The unit cannot be operated with a remote controller. | Remove obstacles between the remote controller and infrared ray receiver. Replace the button cell if it is dead. Check the correct orientation of the button cell. | 14, 17 |
| The unit shut down | Allow 2 or more seconds between switching sound modes or input sources. | 15, 18 |
| Sound does not come out. | Increase volume. Cancel muting. Select the correct device. Check connections. Ensure HDMI (ARC) is correctly connected. Check speaker cable connections. Wait for sound after switching on HDMI. Switch television output to external speakers. Set optical digital sound to PCM. | 13, 12, 11, 18 |
| Image and sound delay. | Wait for a few seconds after switching inputs or TV output. | 19 |
| HDMI interlocking operation is not permitted. | Ensure proper HDMI cable connection. Verify devices are interlocked. Use the SBX-D201 remote if TV remote doesn't work. Check interlocking settings. | 13, 19 |
| If a television is powered off, SBX-D201 is also powered off. | Check HDMI interlocking setting for television. | 19 |
| SBX-D201 cannot be automatically powered on. | Check HDMI interlocking setting for television. | 19 |
| Bluetooth connection is not permitted, or sound is interrupted. | Review placement of devices emitting electric waves. Place Bluetooth device closer to SBX-D201. Redo pairing. | 16, 20 |