Manual for DV-393-S

Name: Manual for DV-393-S
Brand: PIONEER
Availability: InStock

Brand: PIONEER

Category: DVD Player

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 9:20 p.m.

Manual Publish Date: 2006

Warranty Information

Warranty card is included for product registration and service information.

Getting Started:

To turn on the player, press STANDBY/ON. Ensure your TV is set to the correct video input.

Playing Discs:

Press OPEN/CLOSE to open the disc tray, load the disc label-side up, and press PLAY to begin. On-screen menus may appear for DVD and Video CD/Super VCD. For discs with mixed content (DivX, MP3, WMA, JPEG), you may need to select the desired content type from the on-screen display.

Basic Playback Controls:

PLAY: Starts or resumes playback.
PAUSE: Pauses or restarts playback.
STOP: Stops playback.
Fast Forward/Reverse: Press and hold to scan through the disc.
Skip: Jumps to the next or previous track, title, or chapter.
Number Buttons: Enter title/chapter/track numbers for direct selection.

Resume and Last Memory: The player remembers the last playback position for DVDs, CDs, and Video CDs/Super VCDs, allowing you to resume where you left off.

Troubleshooting and error codes

Problem	Remedy
No HDMI audio output.	Ensure the source component is HDMI/DVI/HDCP compatible. Check if the HDMI indicator is lit. If it is lit, the source may be only DVI/HDCP-compatible. If the HDMI indicator is unlit, ensure the player is selected as the HDMI input on the connected component. Verify the HDMI cable is properly connected and undamaged. Confirm that both components are switched on and HDMI compatible.
No HDMI video output.	Ensure the player is selected as the HDMI input on the connected component. Check the HDMI cable connection and condition. Confirm that both components are switched on and HDMI compatible. Ensure the player's HDMI resolution matches the connected component's. Adjust HDMI Resolution in settings if necessary.
No multichannel HDMI audio.	Make sure the HDMI OUT setting is set to Auto.
A connected DVI component (with HDCP) doesn't work with this player.	This unit is designed to be compliant with HDMI. DVI connections may result in unreliable signal transfers. Match the player's resolution to the component's.