Brand: PIONEER
Category: Stereo Receiver
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for MVH-X385BT
Uploaded: Nov. 21, 2025, 7:24 p.m.
Warranty Information
No warranty information is available in this manual.
Basic operation
MVH-X385BT/X185UI
- Turn on the power: Press SRC/OFF.
- Turn off the power: Press and hold SRC/OFF.
- Adjust the volume: Turn the M.C. dial.
- Select a source: Press SRC/OFF repeatedly.
MVH-285BT
- Turn on the power: Press SRC/OFF.
- Turn off the power: Press and hold SRC/OFF.
- Adjust the volume: Turn the M.C. dial.
- Select a source: Press SRC/OFF repeatedly.
Remote Control
- Turn on the power: Press SRC.
- Turn off the power: Press and hold SRC.
- Adjust the volume: Press VOLUME +/-.
- Mute the unit: Press MUTE. Press again to unmute.
- Select a source: Press SRC repeatedly.
Detaching the front panel
Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
Troubleshooting and error codes
| Troubleshooting Item | Possible Cause | Solution |
|---|---|---|
| The display automatically returns to the normal display. | No operations have been made for about 30 seconds. | Perform an operation. |
| The sound is intermittent. | You are using a device, such as a cellular phone, that may cause audible interference. | Move electrical devices that may be causing the interference away from the unit. |
| A call is in progress on a Bluetooth-connected cellular phone. | The sound will be played back when the call is terminated. | |
| The sound from the Bluetooth audio source is not played back. | A Bluetooth-connected cellular phone is currently being operated. | Stop using the cellular phone. |
| The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone. | Make a Bluetooth connection between the unit and the cellular phone again. | |
| AMP ERROR | This unit fails to operate or the speaker connection is incorrect. | The protective circuit is activated. Check the speaker connection. |
| Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance. | ||
| NO XXXX (NO TITLE, for example) | There is no embedded text information. | Switch the display or play another track/file. |