Brand: Price Pfister
Category: Plumbing Fixtures
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for 0X3
Uploaded: April 20, 2026, 7:48 p.m.
Manual Publish Date: 1999-01-01
Warranty Information
No warranty period is specified in the manual.
Valve Body Installation: Position the valve body (2B) ensuring the dimension from the valve centerline (2D) to the finished wall (2C) is 2-3/8" (recommended), with a minimum of 1-7/8" and a maximum of 2-7/8". The diverter holes (2A) should be 1-3/4" in diameter. Ensure the "SHOWER" marking is up and "TUB" marking is down when positioning the valve body in the wall.
Shower Installation: Connect a 1/2 inch iron pipe to the elbow. Screw the shower arm (4A) into the elbow (4B) and tighten until aligned and sealed. Place the flange (4C) onto the shower arm, followed by the shower nut (4D). Place the washer (4F) into the ball (4E) and tighten onto the shower arm. Attach the O-ring (4G) to the shower head end (4H) and connect to the shower nut (4D).
Tub Filler Installation: Connect a 1/2 inch iron pipe to the elbow (5A) and attach the nipple through the wall. Add protective washer (5B), tub flange (5C), and tub washer (5D). Screw the tub filler spout (5E) onto the nipple, align, and tighten until sealed. Attach the knob (5F) to the spout (5E).
Flushing the Valve: Remove the shower head and flush the valve by turning both hot and cold water on full open until the water runs clear. Re-assemble the shower head.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| Leaks | Improperly tightened connections; worn cartridge or seals. | Tighten connections; replace cartridge (9A) or seals (9C) as necessary. |
| Low water pressure | Clogged aerator or shower head; partially closed valve. | Clean aerator/shower head; ensure valve is fully open. |
| Handle difficult to operate | Sticking stem; debris in valve. | Lubricate stem; clean valve body. |
| No hot or cold water | Crossed water supply lines; closed valve. | Verify water supply connections; ensure valve is open. |