Installation Guide for 26 Series

1. Before Proceeding: Read all instructions. Call a professional if unsure. Ensure installation complies with local codes.

2. Shut Off Water Supply: Locate and shut off water supply valves. Remove old faucet and clean sink.

3. Tools Recommended: Plumber's putty, slotted screwdriver, adjustable wrench, flashlight, pliers, cloth. May need new supply lines/shut-off valves.

4. Check Contents: Verify all listed parts are present.

5. Spout Body Installation: Place gasket, insert spout body through sink hole.

6. Securing Spout Body: From underneath, attach washer and locknut to mounting shank and tighten.

7. Control Body Installation: Place base ring and gasket, insert threaded shank and flexible tubing through sink hole.

8. Securing Control Body: From underneath, secure with washer, long nut. Ensure handle swings freely and tighten.

9. Guide Flange & Dispenser Shank Installation: Insert hose guide and dispenser shank through sink holes.

10. Securing Hose Guide & Soap Dispenser Shank: From underneath, secure with locknuts and attach bottle.

11. Side Spray Installation: Insert side spray hose through hose guide.

12. Diverter Installation: Push diverter tee onto mounting shank and secure with clip.

13. Hose Attachments: Connect outlet hose fitting to diverter tube and spray hose fitting to diverter outlet collet.

14. Soap Dispenser Installation: Pour soap into shank, insert pump mechanism, and attach dispenser head.

15. Water Supply Connections: Connect supply lines to faucet inlets, noting hot water connection.

16. Unit Start Up: Turn on water supplies and check for leaks.

17. Spout Function: Spout rotates freely.

18. Valve Function: Lift handle for water flow; continue lifting to increase flow. Rotate counterclockwise for cold, clockwise for hot.

19. Side Spray Operation: Pull spray head forward. Press toggle button to activate spray.

20. Soap Dispenser Operation: Press dispenser head to dispense soap.

21. Flushing & Aerator Cleaning: Flush system, then clean aerator components.

22. Handle Removal: Pry off button, loosen set screw, remove handle.

23. Cartridge Replacement: Turn off water, remove handle and dome cap, unscrew retainer ring, remove cartridge.

24. Hose Removal: Push connection fittings while holding plastic collet, then pull hoses free.