Brand: Pureit
Category: Water Purifier
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for UX5010
Uploaded: April 20, 2026, 7:47 p.m.
Warranty Information
One-year warranty from purchase date, excluding filter cartridge. Contact dealer for repairs.
Precautions
- Use high-quality accessories.
- New hose assemblies are required; old ones cannot be reused.
- Professional installation is recommended.
- Cut off water supply immediately if the product breaks down and contact the dealer.
- Use only municipal tap water within specified pressure (0.1-0.4 MPa) and temperature (5-38°C) ranges. Ambient temperature should be 4-40°C.
- Indoor installation only. Ensure a reliable floor drain within 1.5m.
- Turn off water supply if unused for over 3 days to prevent water hammer.
- Do not drink the water directly from this product.
- Use only company-provided filter elements and accessories for warranty.
Packing List
- Main body x1
- Braided Hose x1
- Instruction Manual x1
Product Function
Reduces turbidity and chromaticity of raw water, protecting and extending the life of other post-installed purification products.
Application Scope
Suitable for home and similar places.
Usage Method
Installed on the front end of other water purification products to protect and extend their service life.
Installation and Debug
- Installation preparation: Check packing list.
- Selection of Installation Location: Choose suitable location, avoid direct sunlight, ensure floor drain within 1.5m.
- Product Installation: Close water inlet valve, connect product, ensure correct water inlet/outlet direction, place foam pad, open main water gate valve after installation, check for leaks.
Filter Cartridge Life Replacement Identification and Purchase
- Recommended replacement cycle: 6 months.
- Replace regularly based on comparison bar and actual usage.
- Actual replacement cycle varies. Replace when flow rate drops significantly.
- Contact authorized dealer for replacement filters.
Filter Cartridge Replacement Method
- Close water inlet ball valve.
- Use tool to limit wobble of end cap, turn wrench clockwise.
- Remove housing nut.
- Detach end cap.
- Remove old filter cartridge, dry with towel.
- Prepare new filter cartridge.
- Fasten end cap.
- Sleeve into housing nut.
- Use wrench to tighten housing nut counterclockwise.
Troubleshooting and error codes
| Failure Symptoms | Reason | Solution |
|---|---|---|
| Much lower water production | The filter cartridge is clogged | Please contact your local dealer to clean or replace the filter cartridge in time |
| The filter cartridge is not replaced in time, exceeding the service life | Please contact your local dealer to replace the filter cartridge in time | |
| Water pressure is too low | Adopt pressurization measures | |
| Poor effluent quality | The filter cartridge failure | Please contact your local dealer to replace the filter cartridge |
| Long-term discontinuation (discontinuation time ≥ 3 days) | Please open the end of the water outlet for rinsing, rinse for 3 ~ 5 minutes | |
| Poor water quality | Please use municipal tap water as the water source | |
| water leakage | Housing nut is not tightened | Please cut off the water source and contact your local dealer |
| Damaged joints | Please cut off the water source and contact your local dealer |