Brand: Qilive
Category: Home Appliance
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Q.6884
Uploaded: April 20, 2026, 7:52 p.m.
Warranty Information
Products are guaranteed for 36 months from the date of purchase or delivery.
Basic Operation:
Powering On/Off: Plug the air conditioner into an outlet; it will enter standby mode. Press the power button to turn it on. To turn off, always use the power button, wait a few minutes before unplugging to allow the appliance to complete a check cycle.
Cool Mode: Ideal for hot, muggy weather. Press the "Cool" button until the indicator lights up. Set the desired temperature between 18°C-32°C (64°F-90°F) using the temperature up/down buttons. Select fan speed using the fan button (F2 for High, F1 for Low).
Fan Mode: Use for air circulation without cooling. Press the "Fan" button until the indicator lights up. Select High or Low speed.
Dry Mode: Reduces room humidity. Prepare as for Cool mode, ensuring the exhaust hose is attached. Press the "Dry" button until the indicator lights up. Fan speed is set automatically.
Timer: Set timers for automatic on/off (up to 24 hours) using the timer button.
USB Charging: Charge mobile devices via the USB port by pressing and holding the designated button.
Troubleshooting and error codes
| Error code | Possible solution |
|---|---|
| PF PROBE FAILURE (Sensor is damaged.) | If this is displayed, contact your local authorized service center for help. |
| FE FULL TANK (Safety tank is full.) | Empty the internal safety tank, following the instructions in the “Maintenance and cleaning" section. |
| Problem | Cause | Solution |
|---|---|---|
| The appliance can not be turned on. | It is not plugged into the mains. | Plug the appliance into the mains. |
| The internal safety device has tripped. | Wait for 30 minutes, if the problem persists, contact your service center. | |
| The appliance works for a short time only. | There are bends in the air exhaust hose. | Position the air exhaust hose correctly and keep it as short and free of curves as possible to avoid bottlenecks. |
| Something is preventing the air from being discharged. | Check and remove any obstacles obstructing air discharge. | |
| The appliance works, but can not cool the room. | Windows, doors and/or curtains are opened. | Close doors, windows and curtains. |
| There are heat sources in the room (oven, hairdryer, etc). | Eliminate the heat sources. | |
| During operation, there is an unpleasant smell in the room. | Air filter is clogged. | Clean the filter as described in "Maintenance and cleaning" section in this manual. |
| The appliance does not operate for about three minutes after restarting it. | The internal compressor safety device prevents the appliance from being restarted until three minutes have elapsed since it was last turned off. | Please wait for three minutes. This is normal delay. |
| The following messages appear: PF/Ft. | The appliance has a self diagnosis system to identify a number of malfunctions. | See the "Self-diagnosis" section in this manual. |