Brand: RICOH
Category: Digital Camera
Document Type:
Language: EN
Available Languages: EN , ES
Manual for WG-20
Uploaded: Aug. 9, 2025, 11:56 p.m.
Warranty Information
Warranty information is not explicitly detailed in this guide, but the device is typically sold with a manufacturer's warranty.
Preparing the Camera
- Attach the strap.
- Install the battery and SD Memory Card by sliding the lock levers.
Turning the Camera On
- Press the power switch. The camera is ready to take still pictures. Press again to turn off.
- Follow the on-screen prompts for initial settings: Language, Hometown, and Date/Time.
Taking Pictures
- Aim the camera at the subject using the focus frame.
- Press the shutter release button halfway to focus.
- Press fully to take the picture.
- Use the four-way controller to select flash mode, drive mode, and focus mode.
Playing Back Images
- Press the button after taking a picture to view it.
- Use the four-way controller to navigate between images.
- Press the button to access delete options or other playback functions.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The camera does not turn on. | The battery is not loaded, or the battery is depleted. | Load the battery, or recharge/replace it. |
| The picture is blurry. | The camera moved when the picture was taken. | Hold the camera steady, or use a tripod. |
| The subject is too close to the camera. | Use Macro mode. | |
| The image is too dark or too bright. | The scene is too dark or too bright for the camera's auto settings. | Adjust exposure compensation (+/- EV). |