Manual for WG-6

Manual for WG-6

Brand: RICOH

Category: Digital Camera

Document Type:

Language: EN

Uploaded: Aug. 9, 2025, 11:56 p.m.

Manual Publish Date: 2019-02-01

Warranty Information

12-month warranty against defects in material or workmanship.

Getting Started:
• Install battery and memory card. Charge battery.
• Turn on camera and follow on-screen prompts for initial settings like language and date/time.
• Format memory card if new or used with other devices.

Basic Shooting:
• Set mode dial to AUTO. Use zoom (4/5) to adjust magnification.
• Press shutter (z) halfway to focus, then fully to take picture.

Viewing Images:
• Press playback button (g) to review captured images.
• Use navigation buttons (abcd) to browse images, delete (i), or magnify (4).

Troubleshooting and error codes

Problem Cause Solution Page
Camera does not turn on. Battery not inserted/exhausted/incompatible. AC adapter not connected. Charge battery, insert correctly. Use RICOH DB-110 battery. Connect AC adapter. p.33, p.99
Camera turns off during use. Auto Power Off activated. Battery exhausted. Turn camera back on. Charge battery. p.35, p.33
Cannot shoot by pressing shutter. Battery exhausted. Camera off. Memory card full/unformatted/locked/dirty. Charge battery. Turn on camera. Format/insert new card/unlock/clean card. p.33, p.35, p.37, p.68
Images are blurred. Camera moved during shooting. Shooting in dark place. Hold camera steady, use tripod. Use flash or high ISO sensitivity. —, p.52, p.50
Images are too bright/dark. Flash output inappropriate. Monitor brightness inappropriate. Exposure compensation set to negative. Adjust flash/monitor brightness. Adjust exposure compensation. —, p.83, p.43
Privacy Policy