Brand: Rollei
Category: Camera
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Action Camera 400
Uploaded: Aug. 10, 2025, 12:32 a.m.
Warranty Information
The EC Declaration of Conformity can be requested from the address specified on the Warranty card.
Getting Started
Powering On: Press and hold the POWER button for several seconds. The Rollei logo will appear on the screen, and three red LED lights will glow red. The camera defaults to video mode.
Video Recording: In video mode, press the SHOOT button to start recording. Red lights will flash. Press SHOOT again to stop.
Picture Mode: To switch to picture mode, turn the camera on and press and hold the SHOOT button for 3 seconds. You will see a 'P' icon on the top left of the screen. Press SHOOT to take a snapshot.
Settings: Press and release the POWER button to enter the Settings menu. Use the Wi-Fi button to navigate, SHOOT to select/confirm, and POWER to go back.
Troubleshooting and error codes
| Q. Why are the red LEDs flickering? | A. The battery is running low. You must recharge the camera. |
| Q. My Rollei Actioncam 400 will NOT turn on. Why? | A. The battery is flat. You need to recharge it (full recharge from flat will take about 5 hours). |
| Q. My Rollei Actioncam 400 turns off automatically. Why? | A: The battery is running flat or you set auto power off function. |
| Q. Videos and pictures are blurred. Why? | A: The lens may be dirty. Clean the lens first. |
| Q. My Rollei Actioncam 400 cannot be seen by my computer. Why? | A: Try a different USB cable or different USB port. |