Brand: Rollei
Category: Camera
Document Type: Manual
Language: EN
Manual for BULLET HD
Uploaded: Aug. 10, 2025, 12:32 a.m.
Warranty Information
The device comes with a manufacturer's warranty of 2 years.
- Charging the battery: Screw out the rear cap, plug in the USB charger. Blue light indicates charging, goes off when full. First use requires 10 hours of charging. Offers up to 125 minutes of recording.
- Powering On/Off: Press and hold the Power/Shutter button (2) for at least 3 seconds until the green LED turns on for power on. Red LED flashes twice, indicating standby mode. Press and hold the Power/Shutter button (2) in standby mode until the red LED flashes to power off.
- Date & Time Setting: Use the DateSet.exe program from the CD or create a "time.txt" file with date and time information (YYYY.MM.DD hh:mm:ss Y/N) and copy it to the memory card.
- Taking Videos: Set the Video/Photo switch (4) to video mode. Turn on the camera. Short press the Power/Shutter button (2) to start recording (red LED blinks). Press again to stop.
- Taking Still Pictures: Set the Video/Photo switch (4) to photo mode. Turn on the camera. Press the Power/Shutter button (2) to take photos (red LED blinks). Press again to stop and return to standby. Photos are taken every 3 seconds.
- Playback on Computer: Connect the camera to a computer via USB cable or use a card reader with the micro SD card. Ensure the device is powered on for data download.
Troubleshooting and error codes
| LED Status Table | Green LED | Red LED | Blue LED |
|---|---|---|---|
| Standby | On | Off | Off |
| Battery charging | Off | Off | On |
| Taking Video | On | Flashing | Off |
| Taking Photo | On | Flashing | Off |
| Low battery | Flashing | Off | Off |
| No micro SD card | Asynchronous Flashing | Off | Off |
| Micro SD card fill up | Speedy Synchronous Flashing | Off | Off |
| Data transfer | On | Flashing | Off |
REMARKS: THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.