Brand: Saivod
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LST1058
Uploaded: April 20, 2026, 7:45 p.m.
Manual Publish Date: 2018-03-20
Warranty Information
The user manual specifies a service life of 10 years for the product.
Washing Machine Operation Summary
This manual provides comprehensive instructions for operating your Saivod LST1058 washing machine. It covers safety precautions, installation, preparation of laundry, correct usage of detergent and softener, program selection, and advanced features like Delayed Start and Child Lock.
Key operations include:
- Installation: Ensure proper connection to water and power, and correct leveling of the machine.
- Preparation: Sort laundry by color, fabric, and soiling level. Prepare items by checking pockets and removing metal attachments.
- Loading: Load laundry loosely into the drum, ensuring not to overload.
- Detergent Use: Add detergent and softener to the correct compartments before starting. Follow dosage recommendations.
- Program Selection: Choose the appropriate program based on laundry type and soiling level, using the program selection knob.
- Starting: Press the Start/Pause button to begin the wash cycle.
- Advanced Features: Utilize Delayed Start for timed operation and Child Lock to prevent accidental changes.
- Maintenance: Regular cleaning of the detergent drawer, drum, and filters is recommended for optimal performance and longevity.
Troubleshooting and error codes
| Problem | Reason | Solution |
|---|---|---|
| Program does not start after closing the door. | Start/Pause/Cancel button was not pressed. It may be difficult to close the loading door in case of excessive loading. | • Press the Start / Pause / Cancel button. • Reduce the amount of laundry and make sure that the loading door is closed properly. |
| Programme cannot be started or selected. | Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). | • To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be canceled. |
| Water in the machine. | Some water might have remained in the product due to the quality control processes in the production. Tap is turned off. Water inlet hose is bent. Water inlet filter is clogged. Loading door may be open. | • This is not a failure; water is not harmful to the machine. • Turn on the taps. • Flatten the hose. • Clean the filter. • Close the door. |
| The machine enters standby mode after the programme starts or it does not take in water. | The water connection may be wrong or water may be cut off (When the water is cut off, washing or rinsing LEDs flash). | • Check the water connection. If the water is cut off, press the Start/Pause key after the water has been supplied again to resume the operation from standby mode. |
| Machine does not drain water. | Water drain hose might be clogged or twisted. Pump filter is clogged. Machine might be standing unbalanced. A hard substance might have entered into the pump filter. | • Clean or flatten the hose. • Clean the pump filter. • Adjust the feet to level the machine. • Clean the pump filter. |
| Machine vibrates or makes noise. | Transportation safety bolts are not removed. Laundry quantity in the machine might be too little. Machine might be overloaded with laundry. Machine might be leaning on a rigid item. | • Remove the transportation safety bolts. • Add more laundry to the machine. • Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine. Make sure that the machine is not leaning on anything. |
| There is water leaking from the bottom of the washing machine. | Water drain hose might be clogged or twisted. Pump filter is clogged. | • Clean or flatten the hose. • Clean the pump filter. |
| Machine stopped shortly after the programme started. | Machine might have stopped temporarily due to low voltage. Draining hose might not be at adequate height. | • It will resume running when the voltage restores to the normal level. • Connect the water draining hose as described in the operation manual. |
| Machine directly discharges the water it takes in. | The water level is not visible from outside of the washing machine. | • This is not a failure. |
| No water can be seen in the machine during washing. | Door lock is activated because of the water level in the machine. Machine is heating up the water or it is at the spinning cycle. | • Drain the water by running the Pump or Spin programme. • Wait until the programme completes. |
| Loading door cannot be opened. | Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. Loading door may be stuck because of the pressure it is subjected to. | • Wait for a couple of minutes for deactivation of the door lock. • Grab the handle and push and pull the loading door to release and open it. |
| Washing takes longer time than specified in the manual.(*) | Water pressure is low. Voltage might be low. Input temperature of water might be low. Number of rinses and/or amount of rinse water might have increased. Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. | • The machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends. • Washing time is prolonged to avoid poor washing results when the supply voltage is low. • Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results. • Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary. • Use recommended amount of detergent. |