Brand: Saivod
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: ES , EN
Brand: Saivod
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: ES , EN
Uploaded: April 20, 2026, 7:49 p.m.
This article is guaranteed for 3 years as per Act 1/2007.
DRY mode: Ideal for reducing room humidity. The appliance should be prepared as for cool mode, with the air exhaust hose attached to discharge moisture outside. Fan speed is selected automatically, defaulting to low speed.
SWING function: This serial unit has no auto swing function.
SLEEP function: Useful for nighttime, it gradually reduces operation. Select cool mode and press the "Sleep" button. The screen reduces brightness and fan speed is low. It maintains the room at optimum temperature with silent operation.
SETTING THE TIMER: Used to delay appliance startup or shutdown, saving electricity. Programming start up: Turn on the appliance, choose the mode and fan speed, then turn it off. Press the "Timer" button to adjust the set time from 0.5 to 24 hours. Programming shut down: With the appliance running, press "Timer" to adjust the set time from 0.5 to 24 hours.
SWITCH THE UNIT OF TEMPERATURE: Press the °C/°F button to change between Celsius and Fahrenheit.
| PROBLEM | CAUSE | SOLUTION |
| THE APPLIANCE DOES NOT COME ON | THERE IS NO CURRENT IT IS NOT PLUGGED INTO THE MAINS THE INTERNAL SAFETY DEVICE HAS TRIPPED | Wait Plug into the mains Wait 30 minutes, if the problem persists, contact your service center |
| THE APPLIANCE WORKS FOR A SHORT TIME ONLY | HERE ARE BENDS IN THE AIR EXHAUST HOSE SOMETHING IS PREVENTING THE AIR FROM BEING DISCHARGED | POSITION THE AIR EXHAUST HOSE CORRECTLY, KEEPING IT AS SHORT AND FREE OF CURVES AS POSSIBLE TO AVOID BOTTLENECKS CHECK AND REMOVE ANY OBSTACLES OBSTRUCTING AIR DISCHARGE |
| THE APPLIANCE WORKS, BUT DOES NOT COOL THE ROOM | THERE ARE HEAT SOURCES IN THE ROOM (OVEN, HAIRDRYER, ETC) THE AIR EXHAUST HOSE IS DETACHED FROM THE APPLIANCE THE TECHNICAL SPECIFICATION OF THE APPLIANCE IS NOT ADEQUATE FOR THE ROOM IN WHICH IT IS LOCATED | ELIMINATE THE HEAT SOURCES FIT THE AIR EXHAUST HOSE IN THE HOUSING AT THE BACK OF THE APPLIANCE |
| DURING OPERATION, THERE IS AN UNPLEASANT SMELL IN THE ROOM | AIR FILTER CLOGGED | CLEAN THE FILTER AS DESCRIBED ABOVE |
| THE APPLIANCE DOES NOT OPERATE FOR ABOUT THREE MINUTES AFTER RESTARTING IT | THE INTERNAL COMPRESSOR SAFETY DEVICE PREVENTS THE APPLIANCE FROM BEING RESTARTED UNTIL THREE MINUTES HAVE ELAPSED SINCE IT WAS LAST TURNED OFF | WAIT. THIS DELAY IS PART OF NORMAL OPERATION |
| THE FOLLOWING MESSAGE APPEARS ON THE DISPLAY: PF/FE | THE APPLIANCE HAS A SELF DIAGNOSIS SYSTEM TO IDENTIFY A NUMBER OF MALFUNCTIONS | SEE THE SELF-DIAGNOSIS CHAPTER |