Name: Manual for HT-X70/HT-TX72/HT-TX75
Brand: SAMSUNG
Availability: InStock

Troubleshooting and error codes

Symptom	Check/Remedy	Symptom	Check/Remedy
Disc tray does not open.	• Is the power cord plugged securely into the outlet? Turn off the power and then turn it back on.	Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking.	• Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable.
Playback does not start.	Check the region number of the DVD. DVD discs purchased from abroad may not be playable. CD-ROMs and DVD-ROMs cannot be played on this DVD player.		Audio language and subtitles do not work.	• Audio language and subtitles will not work if the disc does not contain them.
Playback does not start immediately when the Play/Pause button is pressed.	• Make sure that the rating level is correct. • Are you using a deformed disc or a disc with scratches on the surface? • Wipe the disc clean.		Menu screen does not appear even when the menu function is selected.	• Are you using a disc that does not contain menus?
Sound is not produced.	No sound is heard during fast playback, slow playback, and step motion playback. Are the speakers connected properly? Is the speaker setup correctly customized? • Is the disc severely damaged?	Aspect ratio cannot be changed.	You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function.
Sound can be heard only from a few speakers and not all six.	• When listening to a CD or radio, sound is output to the front speakers (L/R) only. Select "PRO LOGIC II" by pressing (Dolby Pro Logic II) on the remote control to use all six speakers. Make sure that the DVD disc is 5.1-CH compatible. • If you set C, SL, and SR to NONE in the speaker mode in the audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL.	• The main unit is not working. (Example: The power goes out or strange noise is heard.) • The DVD player is not working normally.	Turn off the power and hold the STOP() button on the main unit for longer than 5 seconds. Using the RESET function will erase all stored settings. Do not use this unless necessary.
Dolby Digital 5.1 CH Surround Sound is not produced.	• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the information display?	The password for rating level has been forgotten.	While "NO DISC" message appears on the display of main unit, hold the main unit's STOP() button for longer than 5 seconds. <INITIAL> appears on the display and all settings will return to the default values.
The remote control does not work.	Is the remote control being operated within its operation range of angle and distance? Are the batteries exhausted? Have you selected the mode(TV/DVD) functions of the remote control (TV or DVD) correctly?	Can't receive radio broadcast. <CHECK ANTENNA> is displayed. <ON SIGNAL> is displayed. <OFF AIR> is displayed. Receiving only XM channel 0 and channel 1.	Is the antenna connected properly? If the antenna's input signal is weak, install an external FM antenna in an area with good reception. XM Antenna Jack and the XM Antenna is not properly connected. Check the connections. • Reposition your XM Antenna. • The selected channel is not currently broadcasting. XM Antenna is not activated. Access the website at "http://activate.xmradio.com" with a credit card to sign up.

Manual for HT-X70/HT-TX72/HT-TX75

Warranty Information

Features

Troubleshooting and error codes