Manual for 959NF/900NF

Safety Instructions

Power:

• Do not use a damaged or loose plug.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not excessively bend the plug and wire nor place heavy objects upon them.
• Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time.
• Do not connect too many extension cords or plugs to an outlet.

Installation:

• Do not cover the vents on the monitor cabinet.
• Put your monitor in a location with low humidity and a minimum of dust.
• Do not drop the monitor when moving it.
• Place the monitor on a flat and stable surface.
• Set down the monitor carefully.
• Do not place the monitor face down.
• Do not use the monitor without the monitor stand.

Clean:

• Wipe with a slightly moistened, soft fabric. Do not clean with water.
• Use a water-diluted mild detergent.
• Do not spray detergent directly on the monitor.
• Use the recommended detergent with a smooth cloth.
• If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.
• Do not set a glass of water, chemicals or any small metal objects on the monitor.

Introduction

Unpacking:

• Ensure all included items are present: Power Cord, Stand, Signal Cable, Quick Setup Guide, Warranty Card, User's Guide and Driver Installation CD, USB Cable, USB Hub (Option).

Front:

• Identify and understand the functions of the buttons: Highlight, Exit, Adjust, Menu, Power Indicator, Power.

Rear:

• Identify ports: Power port, Signal port, BNC Connectors (Option), USB Connector.

Bottom:

• Identify ports: Signal port, Power Port, Tilt/Swivel Base.

Setup

Connecting Your Monitor:

• Connect the power cord to the monitor and a nearby outlet.
• Connect the signal cable to the video port on your computer.
• For Macintosh computers, use the appropriate adapter.
• Connect the USB cable to the USB port.
• Turn on your computer and monitor.

Automatic Driver Installation:

• Follow on-screen prompts when prompted for the monitor driver.
• Insert the CD-ROM included with the monitor.
• Select the appropriate driver for your operating system (Windows ME/98/95, XP/2000, NT, Linux).