Brand: SANYO
Category: Air Conditioner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for KHS0971 KHS1271
Uploaded: Nov. 21, 2025, 7:44 p.m.
Warranty Information
Warranty information is not explicitly stated in the provided pages.
The SANYO air conditioner is an inverter type unit that automatically adjusts its capacity. Key features include: Microprocessor Controlled Operation for ease of use, a Simple One-touch Wireless Remote Control, 24-Hour ON or OFF Timer, 1-Hour OFF Timer, Night Setback for energy saving, Automatic and 3-step Fan Speed, Air Sweep Control for even air distribution, and Auto Flap Control. It also offers Automatic Switching between Cooling and Heating, a Hot Start Heating System, Automatic Restart Function for power failures, High Power Operation for quick cooling/heating, Quiet Operation for reduced noise, and ION Operation to freshen the air. The unit is equipped with an Anti-Mold Filter and an Air Clean Filter.
Troubleshooting and error codes
| Failure | Possible Cause | Remedy |
|---|---|---|
| The air conditioner does not operate at all. |
1. Power outage. 2. Circuit breaker tripped. 3. Line voltage too low. 4. Remote control batteries are worn out. |
1. Restore power. 2. Contact an electrician or dealer. 3. Consult an electrician or dealer. 4. Replace batteries. |
| The operation lamp blinks and the air conditioner does not operate. | Problem with the unit. | Contact after-sales service. |
| The compressor starts but stops immediately. | Obstacle in front of the condenser coil. | Remove the obstruction. |
| Insufficient cooling (or heating). |
1. Dirty or blocked air filter. 2. Heat source or too many people in the room. 3. Doors and/or windows open. 4. Obstacle in front of air intake or outlet. 5. Thermostat set too high for cooling (or too low for heating). 6. (Outdoor temperature too low for heating.) |
1. Clean the air filter to improve air circulation. 2. If possible, eliminate the heat source. 3. Close them to prevent hot (or cold) air from entering. 4. Remove the obstacle to ensure good airflow. 5. Set the temperature lower (or higher). 6. (Consult the dealer or try using another heating appliance.) |
| The air conditioner produces a clicking sound. | Plastic parts expand or shrink due to a sudden temperature change during heating or cooling, causing a slight clicking sound. | This is normal and the sound will disappear after a short while. |
| The operation lamp lights up, but the outdoor unit does not operate. | 1. Using a mobile phone near the air conditioner may interfere with its normal operation. |
1. Cut power, then turn the air conditioner back on after a moment. 2. Contact the dealer. |