Brand: SANYO
Category: Air Conditioner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for KMS0772
Uploaded: Nov. 21, 2025, 9:25 p.m.
Warranty Information
No specific warranty period is mentioned in this manual.
Operation Summary
This air conditioner features microprocessor-controlled operation, a wireless remote control, and a 24-hour timer. It offers multiple fan speeds (Auto, High, Medium, Low), air sweep control, and auto flap control for optimal airflow. Special modes include Night Setback, Quiet Operation, High Power Operation, and ION Operation for air freshening. It also has an Anti-Mold Filter and an Air Clean Filter.
The remote control allows for detailed adjustments, including temperature settings, mode selection (Dry, Cool, Fan), fan speed, and airflow direction. The unit can be operated without the remote using the ON/OFF button on the indoor unit. Energy-saving tips are provided, such as keeping air filters clean and closing windows and doors.
The manual also covers setting timers (ON, OFF, 1-hour OFF, daily repeat), adjusting airflow direction manually or automatically, and care and cleaning procedures for various components.
Troubleshooting and error codes
| Trouble | Possible Cause | Remedy |
|---|---|---|
| Air conditioner does not run at all. |
1. Power failure.
2. Leakage circuit breaker tripped. 3. Line voltage is too low. 4. Batteries in remote control unit have run down. |
1. Restore power.
2. Contact service center. 3. Consult your electrician or dealer. 4. Replace batteries. |
| OPERATION lamp blinks and air conditioner does not operate. |
Trouble in system.
|
Contact service center.
|
| Compressor runs but soon stops. |
Obstruction in front of condenser coil.
|
Remove obstruction.
|
| Poor cooling performance. |
1. Dirty or clogged air filter.
2. Heat source or many people in room. 3. Doors and/or windows are open. 4. Obstacle near air intake or air discharge port. 5. Thermostat is set too high for cooling. |
1. Clean air filter to improve airflow.
2. Eliminate heat source if possible. 3. Shut them to keep the heat out. 4. Remove it to ensure good airflow. 5. Set the temperature lower. |
| Clicking sound is heard from the air conditioner. |
In cooling operation, any plastic parts may shrink due to a sudden temperature change. In this event, a clicking sound may occur.
|
This is normal, and the sound will soon disappear.
|
| OPERATION lamp lights but outdoor unit will not run. |
1. The use of cellular phones near the air conditioner may cause disturbance to its normal operation.
|
1. Turn off the power then restart the air conditioner after a while.
2. Consult your dealer. |