Brand: SANYO
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DC-TS760
Uploaded: Nov. 21, 2025, 7:19 p.m.
Warranty Information
Sanyo Europe Ltd. guarantees this equipment against defects in material or workmanship for 12 months from the date of sale.
Turning the power on and off
Press the /ON button. "HELLO" appears briefly on the display. To turn the power off, press the /ON button again. "GOOD-BYE" appears briefly.
Selecting the function
Press the FUNCTION button to select the desired function. Each time the button is pressed, the display changes: DVD/CD → TV → VIDEO → FM TUNER → AM TUNER.
Adjusting the volume
Press the "+" or "-" VOLUME button. The volume level appears on the display.
Reducing volume temporarily
Press the MUTE button. "MUTE" blinks on the display.
Selecting the sound mode
Press the SOUND button repeatedly to select desired sound mode (BASS, TREBLE, CINE, QS). Press button as desired.
Bass boost system
Press the BASS button to select the desired bass boost effect.
Adjusting display brightness
While pressing the button on the main unit, press the ON SCREEN button on the remote control.
Troubleshooting and error codes
| SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| No picture. | The wrong function is selected. | Select the correct function. |
| No sound. | No disc is loaded or an unplayable disc is loaded. | Load a disc or load a playable disc. (Check the disc logo, type, colour system and regional code.) |
| The TV is not set to receive signal from the unit. | Select the correct input function on the TV. | |
| The wrong function is selected. | Select the correct function. | |
| Volume control is set to minimum. | Turn up the volume. | |
| The playback picture is poor. | An unplayable disc is loaded. | Load a playable disc. (Check the disc logo, type, colour system and regional code.) |
| appears on the TV screen. | The selected function does not operate on the disc now. | The feature or action cannot be completed at this time because: - The feature is not available at the moment. - The DVD software restricts it. - The DVD software does not support the feature (e.g., angles). |
| The unit does not start play. | No disc is loaded. | Load a disc. |
| An unplayable disc is loaded. | Load a playable disc. (Check the disc logo, type, colour system and regional code.) | |
| The disc is loaded with the label side down. | Load the disc on the disc tray correctly. | |
| The disc is dirty. | Clean the disc or replace it. | |
| "Parental" is set. | Cancel the parental lock function or change the rating level. Reset it after play. | |
| The operation or display is not normal. | The memory must be reset. | 1. Disconnect the mains lead. 2. Reconnect the mains lead. 3. Resume operation. |
| The remote control does not work properly. | The batteries in the remote control are weak, or installed incorrectly. | Check the battery polarity (+ or -). Replace the batteries. |
| The remote control is not aimed at the remote sensor window. | Aim the remote control at the remote sensor window. |