Brand: SANYO
Category: Phone
Document Type: Manual
Language: EN
Manual for CLT-2415
Uploaded: Nov. 21, 2025, 6:01 p.m.
Warranty Information
Sanyo Communications products are warranted against manufacturing defects for ONE YEAR covering parts and labour.
Basic Operations
Making a Call:
From standby mode, enter the phone number and press TALK/END.
From talk mode, press TALK/END, then enter the phone number.
Receiving a Call:
When the phone rings, press TALK/END to answer.
Redialing a Call:
From standby mode, press REDIAL/PAUSE to cycle through the last three dialed numbers, then press TALK/END to call.
Storing Numbers:
Press and hold MEMORY, select a location, press SELECT/SCAN, enter the name (if desired), press SELECT/SCAN again, enter the number, and finally press SELECT/SCAN to save.
Using Caller ID:
Press CID to view the Caller ID list. Select a number and press TALK/END to call.
Troubleshooting and error codes
| Symptom | Suggestion |
|---|---|
| The CHARGE/IN USE indicator won't come on when the handset is placed in the base unit. | Make sure the AC adaptor is plugged into the base unit and wall outlet. Make sure the handset is properly seated in the base unit. Make sure the charging contacts on the handset and base unit are clean. |
| Weak and/or scratch sound | Make sure that the base unit antenna is in a vertical position. Interference by other electronics equipment such as TVs, computers, microwaves, fluorescent lighting, etc. Move the handset and or base unit to a different location away from metal objects or appliances and try again. Make sure that you are not too far from the base. |
| Can't make or receive calls. | Check both ends of the base unit telephone line cord. Make sure the AC adaptor is plugged into the base unit and wall outlet. Disconnect the AC adaptor for a few minutes, then reconnect it. Reset the digital security code (See page E37). Make sure TALK/END is pressed. |
| The handset doesn't ring or receive a page. | The battery pack may be weak. Charge the battery on the base unit for at least 15 hours. If the handset still does not work, you may need to replace the battery. The handset may be too far away from the base unit. Place the base unit away from appliances or metal objects. Reset the digital security code (See page E37). |
| The Caller ID does not display. | The call was answered before the second ring. The call was placed through a switchboard. Call your local telephone company to verify your Caller ID service is current. |