Brand: SANYO
Category: Phone
Document Type: Manual
Language: EN
Manual for CLT-9950
Uploaded: Nov. 21, 2025, 6:50 p.m.
Warranty Information
One year limited warranty covering manufacturing defects in materials and workmanship for new Sanyo products purchased in Canada.
Getting Started
Unpack and check contents. Set up the base unit in a suitable location, connect it to power and phone line. Prepare the battery pack by charging it for at least 15 hours.
Basics
Make calls by dialing from standby or talk mode. Receive calls and answer using any key or by lifting the handset (if AutoTalk is on). Manage Call Waiting by switching, holding, or sending callers to busy messages. Adjust ringer and earpiece volume. Redial the last three numbers dialed.
Directory
Store up to 20 phone numbers and names. Dial numbers quickly from the directory.
Advanced Calling Features
Access features like Call Return, Busy Redial, Cancel Call Waiting, Call Screen, and Select Blocking. Add or edit new features. Use Call Waiting with Options for more control over waiting calls.
Additional Information
Change digital security code, install belt clip or headset. Learn about battery replacement, power failure, and maintenance. Troubleshooting tips are provided.
Troubleshooting and error codes
| Symptom | Suggestion |
|---|---|
| The CHARGE/IN USE indicator won't come on when the handset is placed in the base unit. | Make sure the AC adaptor is plugged into the base unit and wall outlet. Make sure the handset is properly seated in the base unit. Make sure the charging contacts on the handset and base unit are clean. |
| Weak and/or scratch sound | Make sure that the base unit antenna is in a vertical position. Interference by other electronics equipment such as TVs, computers, microwaves, fluorescent lighting, etc. Move the handset and or base unit to a different location away from metal objects or appliances and try again. Make sure that you are not too far from the base. |
| Can't make or receive calls. | Check both ends of the base unit telephone line cord. Make sure the AC adaptor is plugged into the base unit and wall outlet. Disconnect the AC adaptor for a few minutes, then reconnect it. Reset the digital security code (See page E41). Make sure TALK/END is pressed. |
| The handset doesn't ring or receive a page. | The battery pack may be weak. Charge the battery on the base unit for at least 15 hours. If the handset still does not work, you may need to replace the battery. The handset may be too far away from the base unit. Place the base unit away from appliances or metal objects. Reset the digital security code (See page E41). |
| The Caller ID does not display. | The call was answered before the second ring. The call was placed through a switchboard. Call your local telephone company to verify your Caller ID service is current. |