Manual for DVD-DX500

BASIC OPERATIONS

PLAY DISCS

1. Press "POWER" button on the TV and audio system. Press "TV/VIDEO" on TV to select VIDEO mode. Select S-Video if using an S-VIDEO connection.
2. Select the correct audio input on the amplifier (refer to amplifier manual).
3. Press "STAND BY/ON" on the front panel or "" on the remote to turn the unit on.
4. Press "OPEN/CLOSE" to open the disc tray, insert disc label up, then press "OPEN/CLOSE" again to close. The unit reads the disc and displays the DVD menu/title menu or track number for CDs.
5. Press to stop playback.
6. Press to remove the disc.

SYSTEM SETTING

Press SYSTEM button to set TV TYPE (PAL, AUTO, NTSC) to match your TV.

V-MODE

Press V-MODE to select INTERLACE, PROGRESSIVE, or S-VIDEO when connecting component. For Composite connection, use V-MODE to select Composite video.

DISPLAY

Press DISPLAY button during playback to cycle through title elapsed/remain, chapter elapsed/remain, or folder/filelist view.

FAST PLAY

Press to play forward fast (speeds X2, X4, X8, X16, X32). Press PLAY to return to normal speed.

Press to reverse disc fast (speeds X2, X4, X8, X16, X32). Press PLAY to return to normal speed.

SLOW PLAY

Press SLOW button to play slowly.

PAUSE/STEP

Press PAUSE/STEP to pause playback. Pressing STEP again moves frame by frame.

SELECT AUDIO LANGUAGE

Press AUDIO button to select desired language for multi-language DVDs.

SELECT CHANNELS (VCD)

Press CHANNEL button to select desired audio channel (MONO LEFT, MONO RIGHT, MIX-MONO, STEREO) for VCDs.

MICROPHONE CONTROL

Connect microphone, adjust MIC LEVEL and ECHO on front panel. Select Left/Right/Mixed/Stereo mode with channel button. Adjust volume with remote control and TV/monitor.