Brand: SANYO
Category: Video
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HT27546
Uploaded: Nov. 21, 2025, 8 p.m.
Manual Publish Date: 2006-01-01
Warranty Information
One-year limited warranty covering manufacturing defects and workmanship for new TVs.
- Install Batteries
- Connect Antenna or Cable
- Perform All Channel Search
- Select Input Source (e.g., Component, Video1, Video2)
- Navigate Menus for Picture/Sound adjustments, channel scanning, and V-Guide setup.
- Use remote control keys to change channels, adjust volume, and access features.
- Refer to troubleshooting section for common issues.
Troubleshooting and error codes
| Problem | Check these Conditions | Try these Solutions | Page No. |
|---|---|---|---|
| DTV turns off automatically. | The sleep timer may have been set. | Press POWER key. | 13 |
| No picture, sound (Digital Picture). | Check antenna/external connections. May be station trouble, NO signal broadcast. MUTE function may be on. | Adjust antenna. Try a different channel. Press RESET key to restart channel search. Adjust Volume. | 5, 13 |
| No Captioning. | Check if station is broadcasting a Closed-Caption signal. Select another channel. | Press CAPTION key to select Captioning. | 20 |
| Cannot customize Caption. | Digital Caption signal not broadcast. | Press CAPTION key to select Analog captioning. | 20 |
| Cannot display picture on a full screen. | Check Aspect Ratio of broadcast. | Press PIX SHAPE key to change setting. | 13 |
| Pixilation of Digital image. | Press INFO key and check the signal strength. | Turn antenna, install signal booster. Install outdoor Digital antenna. | 5, 12 |
| Poor Picture/Sound (watching Analog). | Check if program is in color. Check antenna/external connections. Color or Tint misadjusted. May be station trouble. MUTE function may be on. | Try a different channel. Adjust antenna. Press RESET key to restart channel search. Adjust Volume. | 13, 14 |
| "No Signal" message appears on the screen. | Check Audio/Video connections. Check external equipment connections. Check external equipment setting. | Press INPUT key. Switch on external equipment. Set external equipment output connections to match input connections. | 9~11 |
| No DTV Stereo or SAP sound. | Check if station is broadcasting a true MTS stereo signal or a SAP signal. | Press AUDIO key. | 13 |
| No Cable channels above number 13. | Cable Channel Indicator C should appear next to channel number. | Switch Analog Antenna signal to Cable. | 16 |
| No UHF, VHF Channels OK. | Cable Channel indicator C should not appear next to the channel number. | Switch Analog Antenna signal to UHF/UHF. | 16 |
| Cannot select or scan some channels. | Channel may be removed from memory. Check antenna connections. No digital signal being broadcast. Signals are weak. V-Guide is set to block programming. | Select CH. Scan Memory and manually add channels or start CH. (channel) search. Turn Antenna or install signal booster. Set V-Guide to “Allow All” or press the RESET key to clear all settings and restart channel search. | 17 18 - 19 13 |
| Remote Control will not work TV. | Check batteries. Check to see if TV is plugged in. | Replace batteries, two “AAA.” Aim remote control at front of TV. | 6,12~13 |
| Cabinet makes popping sound. | This is a normal condition during warm-up and cool down of the plastic cabinet parts. | - | - |