Manual for VCC-3924P

Manual for VCC-3924P

Brand: SANYO

Category: Video

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:13 p.m.

Basic Operation

Camera Installation:

  • Remove the lens mount cap before installing the lens.
  • Install a CS mount type auto-iris lens or a C mount lens with the supplied adapter.
  • Attach the installation bracket to the top or bottom of the camera using the provided screws.

Lens Installation:

  • For DC type lenses: Connect the lens plug to the camera's LENS connector and set the A.I. LENS switch to DC.
  • For VIDEO type lenses: Attach the C mount adapter to the lens, install the lens onto the camera, connect the lens iris plug, and set the A.I. LENS switch to VIDEO. Adjust ALC and LEVEL controls as needed.

Connections:

  • Connect the video signal to a monitor or VCR.
  • Connect a 24 V AC power source to the camera.
  • Turn on all connected devices. The POWER indicator will light.

Settings:

  • Adjust Line Phase, White Balance, Electronic Iris, Backlight Compensation, and Lens Iris as necessary for optimal image quality.

Troubleshooting and error codes

Problem Possible Causes & Solutions
No picture on the monitor screen
  • Is the power turned on to all connected devices? Is the voltage correct?
  • Are all the signal connecting cables correctly connected?
  • Is the lighting sufficient?
  • Has the lens cap been removed?
  • Is the lens type (DC or VIDEO) correctly selected?
  • Depending on the type of lens, the A. I. LENS switch must be set accordingly.
  • Is the iris control correctly set?
    • A: When using a DC type lens, the LEVEL volume (inside the camera casing) should be adjusted.
    • B: When using a VIDEO type lens, the LEVEL volume (on the lens) should be adjusted.
The picture is not clear
  • Is the monitor correctly adjusted?
  • Is the flange-back position correctly set?
  • Is the lens focus correctly adjusted?
  • Are the lens surfaces clean?
Privacy Policy