Brand: SEALEY
Category: Wet & Dry Vacuum Cleaner
Document Type: Manual
Language: EN
Manual for PC195SD
Uploaded: Nov. 21, 2025, 6:25 p.m.
Manual Publish Date: 2014-07-24
Warranty Information
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
- Assembly: Ensure the unit is unplugged. Undo clasps, lift top section, remove contents, attach casters to container, and insert handle. For dry vacuuming, install dust filter and bag; for wet vacuuming, install foam filter. Connect hose and desired accessories.
- Dry Vacuuming: Ensure dust filter is clean and dry, and dust bag is installed. Secure top section, connect hose and attachments, plug in, and turn on. Turn off and unplug after use.
- Wet Vacuuming: Ensure unit is unplugged, container is clean. Remove dust filter/bag, install foam filter. Secure top section, connect hose and nozzle. Plug in, turn on. Turn off and unplug after use, then empty and dry the container.
- Blower Operation: Connect hose to blower connection, attach nozzle. Ensure unit is off and plugged in, then turn on. Use to clear obstructions. Turn off and unplug if hose is blocked.
Troubleshooting and error codes
| Problem | Possible Causes | Corrective Action |
|---|---|---|
| Vacuum will not operate. | No power supply | Check power supply: cable, circuit breakers, fuses |
| Faulty power cable | Unplug and check the power cable. If damaged, have it repaired by a professional. | |
| Dust comes from the motor cover. | Container full of liquid. | Empty container. |
| The dust filter is missing or damaged. | Attach or replace dust filter. | |
| Reduced efficiency and motor speed/vibration. | Blockage in the nozzle, hose, or the vacuum inlets, or the dust filter is blocked by fine dust. | Check nozzle, hose and container inlets for blockage. Take off the dust filter and wash clean it. Reuse it when it is dry. If necessary use a new dust filter. |