Manual for DV-SL1200W

Manual for DV-SL1200W

Brand: SHARP

Category: Audio

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:09 p.m.

Manual Publish Date: 2008-06-16

Warranty Information

The product comes with a 24-month warranty, covering manufacturing defects.

Operating Your SHARP DVD Player

Basic Operations:

Powering On/Off: Press the ON/STAND-BY button to turn the unit on or put it into stand-by mode. Ensure the AC power lead is properly plugged in.

Disc Playback: Load a disc, then press the PLAY button. Use the chapter/track skip buttons, fast forward/backward, and pause functions for control.

Menu Navigation: Use the HOME MENU button to access settings and options. Navigate menus using the cursor buttons and confirm selections with the ENTER button.

Advanced Features:

Connections: Connect to your TV using HDMI, Component Video, or standard AV cables as described in the "System Connections" section.

Settings: Adjust audio, video, and other preferences through the setup menus accessed via the HOME MENU button.

Special Playback: Explore functions like zoom, step, slow-motion, and repeat play for enhanced viewing.

Troubleshooting and error codes

Symptom Possible cause
Even though a disc has been loaded, "NO DISC" is displayed.
  • Is the disc loaded upside down?
  • Is the disc very dirty?
  • Does the disc satisfy the standards?
  • Is the unit located near excessive vibrations?
  • Has condensation formed inside the unit?
Playback sounds are skipped.
  • Is the disc very dirty?
  • Does the disc satisfy the standards?
  • Is the unit located near excessive vibrations?
  • Has condensation formed inside the unit?
The control buttons do not function. Music or video playback is interrupted.
  • Is the disc very dirty?
  • Is the unit located near excessive vibrations?
  • Has condensation formed inside the unit?
Pictures and sound are skipped.
  • Is a disc other than a DVD (region number on the back of the unit), VCD, audio CD, CD-R or CD-RW loaded?
  • Are the video and audio cables connected improperly?
The unit does not operate even if the power is on.
  • Is a disc other than a DVD (region number on the back of the unit), VCD, audio CD, CD-R or CD-RW loaded?
  • Is the disc very dirty?
  • Is the disc loaded upside down?
  • Clean the optical pickup if it is dirty.
  • Is the TV input set to "VIDEO 1/VIDEO 2", etc.?
  • Is the unit turned on?
Image cannot be played back. (Sound is not heard.)
  • Is the TV input set to "VIDEO 1/VIDEO 2", etc.?
  • Is the unit turned on?
Privacy Policy