Manual for MD-MS722H

Name: Manual for MD-MS722H
Brand: SHARP
Availability: InStock

Brand: SHARP

Category: Audio

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:35 p.m.

Warranty Information

This guarantee applies to defects occurring within one year from the date of purchase, provided the product is sent to the repair address.

Introduction

Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product.

Power Source

This unit can be used with 4 different power sources: a rechargeable battery, an AC adaptor, a battery case, and a separately available car adaptor (AD-CA20X).

Recording

Two types of recording are possible: "Digital recording" and "Analogue recording". There are different cables and connections for each type of recording, depending on the sockets on the equipment being connected to the unit.

Playing a MiniDisc

Convenient playback functions are detailed on pages 24-27.

Editing

Editing functions are detailed on pages 28-33.

Troubleshooting and error codes

PROBLEM	CAUSE
The unit does not turn on.	Is the AC adaptor disconnected? Is the battery exhausted? Is the unit in the safety mode? Has condensation formed inside the unit? Is the unit being influenced by mechanical shock or by static electricity?
No sound is heard from the earphones.	Is the volume set too low? Is the remote control unit or the earphones plugged in? Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music?
When the operation buttons are pressed, the unit does not respond.	Is the unit in the safety mode? Is the battery exhausted? Is the remote control unit plug or the earphone plug inserted firmly?
Some sounds are skipped.	Is the battery exhausted? Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.	Has the track number or character information been written on the disc yet? Is the unit in the recording or editing mode?
Recording and editing are impossible.	Is the MiniDisc protected against accidental erasure? Is the unit connected properly to the other equipment? Is the AC adaptor unplugged or did a power failure occur whilst recording or editing? Is the unit in the safety mode? Is an optical signal being output from the external equipment? Read the operation manual for the external equipment.