Manual for AH-XP* series

Manual for AH-XP* series

Brand: SHARP

Category: Home Appliances

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:17 p.m.

Warranty Information

Refer to the warranty card for details.

Basic Operation

  1. Press the MODE button to select the desired mode (AUTO, COOL, DRY, FAN).
  2. Press the ON/OFF button to start operation. The OPERATION lamp will light up.
  3. Press the THERMOSTAT button to set the desired temperature.
  4. Press the FAN button to set the desired fan speed.

Notes

  • AUTO MODE: Temperature and fan speed are automatically selected based on room temperature.
  • DRY MODE: Fan speed is preset to AUTO and cannot be changed.
  • Power Failure: The unit will restart with previous settings after power recovery, except for TIMER, POWERFUL JET, BEST SLEEP, BABY MODE, ECO MODE, and SELF CLEAN settings.

Troubleshooting and error codes

Before Calling for Service
Unit does not operate Check if the circuit breaker has tripped or the fuse has blown.
Unit does not cool effectively Check the filters. If dirty, clean them.
Check the outdoor unit to make sure nothing is blocking the air inlet or outlet.
Check the thermostat is proper setting.
Make sure windows and doors are closed tightly.
Unit does not receive the remote control signal Check if the remote control batteries have become old and weak.
Try to send the signal again with the remote control pointed properly towards the unit's signal receiver window.
Check if the remote control batteries are installed properly.
Privacy Policy