Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for AX-1500J(S)
Uploaded: Nov. 21, 2025, 6:14 p.m.
Warranty Information
This warranty covers faults in material and manufacture for the period stated, subject to conditions.
Getting Started
1. Plug the oven into a power point.
2. Open the door. The display will show ENERGY SAVE MODE.
3. Close the door.
Stop/Clear
Press Stop/Clear to:
- Correct programming mistakes.
- Temporarily stop cooking.
- Return to the home page.
- Cancel a programme during cooking (press twice).
Back
Press Back/Info to go back to the previous programming page before pressing START.
Clean the Oven Before First Use
1. Ventilate the room.
2. Fill the water tank and install.
3. Install the empty drip tray.
4. Press SuperSteam Convection, select MANUAL, then SUPER STEAM GRILL, then WITHOUT PREHEAT. Set cooking time to 20 min and press START.
Troubleshooting and error codes
| Error Message | Cause | Solution |
|---|---|---|
| 'Fill water tank' | Insufficient water in the water tank. | Fill the water tank. |
| 'DESCALING IS NECESSARY' | Scale build-up in the water circuit. | Perform the Descale function. |
| 'Replace drip tray' or 'Empty drip tray and replace' | Drip tray is full or not correctly installed. | Empty and replace the drip tray. |
| SENSOR ERROR (Sensor Reheat) | Sensor does not detect vapour or door opened/Stop/Clear pressed before time display. | Clear error, press Stop/Clear, and reheat manually. |