Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for CV-P10NC
Uploaded: Nov. 21, 2025, 6:09 p.m.
Warranty Information
One year parts and labor, with five years for the sealed cooling system parts.
Cool Mode
- Press MODE to select COOL.
- Press POWER to start.
- Press TEMPERATURE to set desired temp (64-86°F).
- Press FAN to set fan speed (Auto, Quiet, Low, High).
Dehumidification Mode
- Remove exhaust hose.
- Turn drainage nozzle to OPEN, pull stopcock.
- Attach drain grommet to hose, attach hose to nozzle, secure with band.
- Insert hose into container (min. 3.5 gal capacity), monitor and empty.
- Press MODE to select DEHUM.
- Press POWER to start. Fan speed is AUTO.
Fan Mode
- Install exhaust hose, turn drainage nozzle to CLOSE.
- Press MODE to select FAN.
- Press POWER to start.
- Press FAN to set speed (Quiet, Low, High).
Ventilation Mode
- Install exhaust hose, turn drainage nozzle to CLOSE.
- Press MODE to select VENT.
- Press POWER to start.
- Press FAN to set fan speed (Quiet, Low, High).
Troubleshooting and error codes
| AIR CONDITIONER DOES NOT OPERATE | Is the unit plugged in or plug loose? | Check plug connection. |
| Is the fuse blown or the circuit breaker tripped? | Check fuse/breaker. | |
| Has the unit been reset within 3 minutes after power failure? | Wait 5 minutes before restarting. | |
| Are the OPERATION, TIMER, and MEGA COOL lamps blinking? | Water tank is full. Drain the unit. | |
| Check the power cord. | Ensure proper connection. | |
| AIR CONDITIONER DOES NOT COOL WELL | Is the unit set to FAN, DEHUMIDIFICATION, or VENTILATION mode? | Change MODE to COOL. |
| Are the filters clogged with dust? | Clean or replace filters. | |
| Is the cooling coil frozen? | Run in FAN mode on HIGH speed until frost disappears. | |
| Is the temperature set correctly? | Adjust temperature setting. | |
| Is the window exposed to direct sunlight? | Close curtains/blinds. | |
| Is the exhaust hose too long? | Shorten the exhaust hose. |