Manual for CV-P10RC

Manual for CV-P10RC

Brand: SHARP

Category: Home Appliances

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:20 p.m.

Warranty Information

This product comes with a one (1) year parts and labor limited warranty from the date of purchase.

Basic Operation:

Cool Mode: Press MODE to select COOL, then POWER to start. Adjust TEMPERATURE and FAN speed as desired.

Dehumidification Mode: Press MODE to select DEHUM. Press POWER to start. Fan speed is AUTO.

Fan Mode: Press MODE to select FAN. Press POWER to start. Adjust FAN speed.

Ventilation Mode: Press MODE to select VENT. Press POWER to start. Adjust FAN speed.

Plasmacluster: Press PLASMACLUSTER button to activate. Press again to deactivate.

Mega Cool: Press MEGA COOL during cooling for high-speed fan operation.

1-Hour Off Timer: Press 1 hr OFF to set the unit to turn off after one hour.

Timer Operation: Press ON TIMER or OFF TIMER to set the desired operating time.

Main Unit Operation: Press POWER button on the unit to operate without the remote.

Drainage: If the unit stops operating with blinking lights, it indicates the water tank is full. Follow drainage instructions.

Maintenance: Regularly clean filters, the unit, and the insect protection screen.

Troubleshooting and error codes

PROBLEM POSSIBLE CAUSE REMEDY
AIR CONDITIONER DOES NOT OPERATE Unit is not plugged in or plug is loose. Check plug and outlet.
Fuse blown or circuit breaker tripped. Check fuse or circuit breaker.
Unit reset within 3 minutes after power failure. Wait at least 3 minutes before restarting.
Water tank is full (TIMER, OPERATION, MEGA COOL lamps blinking). Drain the water tank.
Outlet problem. Check power cord.
AIR CONDITIONER DOES NOT COOL WELL Mode set to FAN, DEHUMIDIFICATION, or VENTILATION. Set to COOL mode.
Filters are clogged with dust. Clean or replace filters.
Cooling coils are frozen. Operate in FAN mode on HIGH speed until ice melts.
Improper temperature setting. Adjust temperature.
Direct sunlight on window. Close blinds or drapes.
Exhaust hose is too long. Shorten the exhaust hose.
Privacy Policy