Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for QW-NA26F39DI-EN
Uploaded: Nov. 21, 2025, 6:36 p.m.
Warranty Information
No specific warranty period is mentioned in this document.
- Installation: Choose a suitable location, connect water and electrical supply according to regulations, and ensure the machine is level and stable.
- Before First Use: Prepare the dishwasher by removing packaging, setting the water softener level, and filling the rinse aid compartment.
- Salt Usage: Use only special dishwasher salt to soften water and prevent limescale. Fill the salt compartment as instructed.
- Detergent Use: Use detergents specifically designed for dishwashers. Add the correct amount based on the program, soil level, and load size.
- Loading: Load dishes according to guidelines, ensuring spray arms can rotate freely and the detergent dispenser can open. Place sharp items like knives horizontally or blade-down.
- Programs: Select the appropriate program from the Program Table based on the type of soil and desired wash intensity.
- Control Panel: Use the buttons to turn the machine on/off, select programs, set delay start, use options (like Extra Hygiene, Half Load, Extra Drying, Extra Fast, Extra Silent), and monitor the program status.
- Maintenance: Regularly clean filters, spray arms, and door seals to ensure optimal performance and longevity.
- Troubleshooting: Refer to the tables for common faults, possible causes, and solutions, or contact service for errors like FF, F5, F3, etc.
Troubleshooting and error codes
| FAULT | POSSIBLE CAUSE | TROUBLESHOOTING |
|---|---|---|
| Whitish stains remains on dishes. | Not enough detergent used. | Use the correct amount of detergent, as instructed in the programme table. |
| Rinse aid dosage and/or water softener setting set too low. | Increase rinse aid and/or water softener level. | |
| High water hardness level. | Increase water softerner level and add salt. | |
| Salt compartment cap not closed properly. | Check that the salt compartment cap is closed properly. | |
| Dishes do not dry. | Drying option is not selected. | Select a programme with a drying option. |
| Rinse aid dosage set too low. | Increase rinse aid dosage setting. | |
| Stainless-steel quality of the dishes is insufficient. | Use only dishwasher-proof sets. | |
| Rust stains form on the dishes. | High level of salt in wash water. | Adjust the water hardness level using water hardness table. |
| Salt compartment cap not closed properly. | Check that the salt compartment cap is closed properly. | |
| Too much salt spilled in the Dishwasher while filling it with salt. | Use funnel while filling salt to the compartment to avoid spillage. | |
| Detergent remains in the detergent compartment. | A poor mains grounding. | Consult a qualified electrician immediately. |
| Detergent was added when the detergent compartment was wet. | Make sure detergent compartment is dry before use. |