Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for QW-NI13I49EX-EN
Uploaded: Nov. 21, 2025, 6:12 p.m.
Warranty Information
Contact customer service for information on genuine spare parts and warranty.
Dishwasher Operation Summary
This manual provides comprehensive instructions for operating your SHARP dishwasher. Key operations include:
- Preparation: Ensure proper installation, including water and electrical connections. Set the water softener level and fill the rinse aid compartment before first use.
- Loading: Load dishes correctly, ensuring spray arms are not obstructed and the detergent dispenser can open. Use the appropriate racks for different items.
- Detergent and Rinse Aid: Use specialized dishwasher detergents and rinse aids. Follow instructions for filling the dispenser.
- Program Selection: Choose the appropriate wash program based on soil level and desired outcome. Refer to the program table for details.
- Control Panel: Use the On/Off, Program Selection, Half Load, and Delay buttons to manage the dishwasher's functions.
- Maintenance: Regularly clean filters, spray arms, and the drain pump to ensure optimal performance and longevity.
- Troubleshooting: Consult the fault warning section for guidance on common issues.
Always refer to the safety instructions before operating the appliance.
Troubleshooting and error codes
| FAULT | POSSIBLE CAUSE | TROUBLESHOOTING |
|---|---|---|
| Whitish stains remains on dishes. | Not enough detergent used. | Use the correct amount of detergent, as instructed in the program table. |
| Rinse aid dosage and/or water softener setting set too low. | Increase rinse aid and/or water softener level. | |
| High water hardness level. | Increase water softerner level and add salt. | |
| Dishes do not dry. | Salt compartment cap not closed properly. | Check that the salt compartment cap is closed properly. |
| Drying option is not selected. | Select a program with a drying option. | |
| Rinse aid dosage set too low. | Increase rinse aid dosage setting. | |
| Rust stains form on the dishes. | Stainless-steel quality of the dishes is insufficient. | Use only dishwasher-proof sets. |
| High level of salt in wash water. | Adjust the water hardness level using water hardness table. | |
| Salt compartment cap not closed properly. | Check that the salt compartment cap is closed properly. | |
| Detergent remains in the detergent compartment. | Too much salt spilled in the Dishwasher while filling it with salt. | Use funnel while filling salt to the compartment to avoid spillage. |
| A poor mains grounding. | Consult a qualified electrician immediately. | |
| Detergent was added when the detergent compartment was wet. | Make sure detergent compartment is dry before use. |