Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SJ-BA10I HXL1-EU
Uploaded: Nov. 21, 2025, 8:50 p.m.
Warranty Information
This fridge freezer conforms to current safety requirements. Retain this manual for future use.
Using the Control Panel
Navigate through settings using the 'Screen selector' (#9). Adjust values with 'Decrease value' (#10) and 'Increase value' (#11). Select modes with 'Mode Selector' (#12) and child lock with 'Child Lock Selector' (#13).
Special Modes
Super Freeze: For large quantities of food. Activate by pressing #9 until freezer temp is selected, then #10 until the Super Freeze indicator appears.
Super Cool: For cooling large amounts of food or drinks. Activate by pressing #9 until fridge temp is selected, then #10 until the Super Cool indicator appears.
Eco Mode: For energy saving. Press #12 until the Eco Mode icon appears.
Holiday Mode: For extended absences. Only the freezer compartment remains active. Press #12 until the Holiday Mode icon appears.
Drink Cool Mode: Cools drinks within a set time. Press #12 and #9 simultaneously for 5 seconds.
Screen Saver Mode: Turns off control panel lights after 30 seconds of inactivity.
Child Lock: Prevents accidental changes. Press and hold #13 for 5 seconds to activate/deactivate.
Troubleshooting and error codes
| ERROR TYPE | MEANING | WHY | WHAT TO DO |
| E01 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E02 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E03 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E06 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E07 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E08 | Low Voltage Warning | Power supply to the device has dropped to below 170W. | This is not a device failure, this error helps to prevent damages to the compressor. - The voltage needs to be increased back to required levels. If this warning continues, contact the Sharp help desk as soon as possible. |
| E09 | Freezer compartment is not cold enough | Likely to occur after long term power failure. | 1. Set the freezer temperature to a colder value or set Super Freeze. This should remove the error code once the required temperature has been reached. Keep doors closed to improve time taken to reach the correct temperature. 2. Remove any products which have thawed/defrosted during this error. They can be used within a short period of time. 3. Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer. If this warning continues, contact the Sharp help desk as soon as possible. |
| E10 | Fridge compartment is not cold enough | Likely to occur after: - Long term power failure. - Hot food has been left in the fridge. |
1. Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve time taken to reach the correct temperature. 2. Please empty the location at the front area of air duct channel holes and avoid putting food close to the sensor. If this warning continues, contact the Sharp help desk as soon as possible. |
| E11 | Fridge compartment is too cold | Various | 1. Check is Super Cool mode is activated 2. Reduce the fridge compartment temperature 3. Check to see if vents are clear and not clogged If this warning continues, contact the Sharp help desk as soon as possible. |