Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SJ-SC41CHXI2-EU
Uploaded: Nov. 21, 2025, 6:02 p.m.
Warranty Information
This manual contains safety information, installation, use, and maintenance instructions for your Freezer. Retain for future use.
Using Your Freezer
- Super Freeze Mode: Used for freezing large quantities of food, prepared foods, or fresh food quickly to retain freshness. Activate by pressing the "-" button until the "Super Freeze" logo appears.
- Economy Mode: For energy saving during periods of less use (e.g., holidays). Activate by pressing the "Mode Selector" button until the "Eco Mode" icon appears. The temperature setting will display 'E'.
- Screen Saver Mode: Automatically turns off the control panel lighting after 30 seconds of inactivity to save energy. Press any key to reactivate the display.
- Child Lock: Prevents accidental changes to settings. Activate/deactivate by pressing and holding the "Child Lock Selector" button for 5 seconds.
- Door Open Alarm: Beeps if the freezer door is left open for more than 2 minutes.
- Temperature Settings: Adjust using the "Increase" (+) or "Decrease" (-) buttons (-16°C to -24°C, or "super" for Super Freeze).
Troubleshooting and error codes
| ERROR TYPE | MEANING | WHY | WHAT TO DO |
| E01 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E02 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E03 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E06 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E07 | Sensor warning | Contact the Sharp help desk as soon as possible. | |
| E08 | Low Voltage Warning | Power supply to the device has dropped to below 170W. | This is not a device failure, this error helps to prevent damages to the compressor. The voltage needs to be increased back to required levels. If this warning continues, contact the Sharp help desk as soon as possible. |
| E09 | Freezer compartment is not cold enough | Likely to occur after long term power failure. | 1. Set the freezer temperature to a colder value or set Super Freeze. This should remove the error code once the required temperature has been reached. Keep doors closed to improve time taken to reach the correct temperature. 2. Remove any products which have thawed/defrosted during this error. They can be used within a short period of time. 3. Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer. If this warning continues, contact the Sharp help desk as soon as possible. |