Brand: SHARP
Category: Office Equipment
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PC-AV18P
Uploaded: Nov. 21, 2025, 8:37 p.m.
Manual Publish Date: 2003-08-01
Warranty Information
Refer to the provided Consumer Limited Warranty for repair and warranty information.
Quick Setup
Installing Battery Pack: Place computer bottom-up on a stable surface. Match projected parts of the battery to notched parts on the computer. Push until it clicks. Turn computer over.
Connecting to AC Power Source: Use the included AC adapter and power cord. Plug the adapter cable into the computer's rear AC adapter jack. Plug the power cord into the adapter. Plug into a wall outlet. For first-time setup, use AC power.
Turning on Computer: Slide the display cover lock lever to release the cover. Raise the cover. Press the power button. The power indicator should turn green.
Setting Up Windows: Follow on-screen instructions. This takes approximately 5-10 minutes and includes configuring location, time zone, accepting the license agreement, naming the computer, creating an account, and completing configuration. Ensure AC power is connected and do not connect peripherals until setup is complete.
Troubleshooting and error codes
| Problem | Solution |
| Resetting System | If unable to turn off with power switch, press reset switch on bottom. Wait 10 seconds, then press power switch. |
| Glide pad malfunction | Surface may be moist or dirty. Wipe with a soft, dry cloth. |
| Cannot use a floppy disk | Confirm external drive connection, disk insertion, drive/file name. Disk may be unformatted/corrupted. Check for write-protection or if disk is full. |
| Cannot read/write to hard disk | Confirm drive/file names are correct. Ensure sufficient free space. |
| Cannot read data from compact disc or play files | Confirm CD insertion, drive/file names. CD/files must be supported. CD should not be stained or scratched. Confirm optical drive is installed. |
| Drive does not open | Confirm optical drive installation and that computer is on. If off, insert a fine rod into the drive tray ejection hole. |
| DVD video does not play smoothly | Ensure AC power is used. Power management may be active; disable it. |
| Optical drive not recognized | If computer is on with a DVD inserted, turn off, open tray, remove DVD, then turn computer on. |
| Cannot communicate through built-in modem | Confirm telephone line connection. Check dial settings (pulse/tone). Verify country/region and network configuration. Ensure username/password is correct. Set COM port appropriately. Turn off power management. Remove unusual devices or contact dealer. Consult PBX staff if connected to a PBX. |
| Access speed slow | Close open applications. Try another ISP or connect at a different time. |
| Cannot access LAN | Confirm cable connection to LAN jack and network hub. Verify network configuration and username/password. |
| Cannot detect access point (wireless LAN) | Confirm access point is powered on. Restart computer. Ensure wireless LAN is enabled. Try detecting by disabling and enabling Wireless Network Connection. If multiple access points, select the desired network. |
| Cannot connect to network via access point (wireless LAN) | Ensure Any available network is selected. Confirm ESSID matches. Enter WEP key correctly if security is enabled. |
| Cannot communicate with other computers (wireless LAN) | Ensure wireless LAN is enabled on all computers. Select Computer-to-computer (ad hoc) networks. Adjust distance between computers. Confirm IP address, subnet mask, and default gateway. Enter WEP key correctly if security is enabled. |
| Peripheral devices not functioning | Confirm connection, Windows XP compliance, and driver installation. Set System standby/hibernate to Never. |
| Cannot print | Ensure printer is on, connected correctly, and ready. Check paper. Install printer driver. Add printer via Control Panel if not installed. |
| Battery pack discharged quickly | Initialize the battery pack. |
| Date and/or time incorrect | Correct date and time in Windows via the taskbar. |
| Cannot use a hardware device | Check Device Manager to ensure the device is enabled. |
| Cannot produce sound | Turn volume control up. Check Windows volume via speaker symbol on taskbar. |
| Cannot turn off computer | Follow instructions for keyboard/glide pad malfunction. |
| Computer is so hot | Normal when charging battery pack; surrounding area or front of keyboard may get hot. |
| Cannot record sound from microphone | Follow detailed steps involving speaker symbol, Options, Properties, Recording, and Microphone settings. |
| Cannot find drivers and applications | They may be on the last recovery disk (e.g., "Disk 2"). Consult service staff if unsure or CD is missing them. |