Manual for PC-AV18P

Manual for PC-AV18P

Brand: SHARP

Category: Office Equipment

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:23 p.m.

Manual Publish Date: 2003-08-01

Warranty Information

Refer to the provided Consumer Limited Warranty for warranty information.

Quick Setup

Your computer is designed and pre-configured for easy setup and use. This chapter describes the steps to set up and run your computer as quickly as possible. Read this chapter first.

Installing Battery Pack

  1. Place your computer with the bottom up on a stable work surface.
  2. Insert the battery pack into your computer by matching the projected parts of the battery pack to the notched parts on your computer.
  3. Push the battery pack until you hear the clicking sound.
  4. Turn your computer over and go to the next section.

Connecting to AC Power Source

  1. Plug the AC adapter cable to the AC adapter jack on the rear side of your computer.
  2. Plug the AC power cord into the AC adapter.
  3. Plug the AC power cord into a wall outlet.

Setting Up Windows

To setup Windows, follow the instructions on the screen. It takes approximately 5-10 minutes to complete the entire setup process. The steps in the setup process are as follows:

  • Configuring your location, language and keyboard type
  • Configuring your time zone
  • Accepting license agreement
  • Naming your computer
  • Creating an account
  • Completing configuration

Troubleshooting and error codes

Problem Solution
Why can't I use a floppy disk? Confirm the external floppy disk drive unit is correctly connected.
Confirm the floppy disk is inserted correctly.
Confirm the drive or file name is correct.
The floppy disk may not be formatted or could be corrupted. Format the disk or use another disk.
If you cannot write to a floppy disk, the disk may be write-protected. Eject the disk and ensure that the write-protect tab covers the detection hole.
If you cannot write to a floppy disk, the disk may be full. Use another disk.
Why can't I read or write data to/from the hard disk? Confirm the drive and file names are correct.
Confirm the hard disk has sufficient free space.
Why can't I read data from a compact disc or play files? Confirm the CD is inserted correctly.
Confirm the drive and file names are correct.
Confirm the CD is not stained or scratched.
Confirm the CD or files are supported.
Confirm the optical drive unit is correctly installed to your computer.
Why the drive does not open? Confirm the optical drive unit is correctly installed to your computer.
Confirm your computer is turned on.
When your computer is turned off, insert a fine rod into the drive tray ejection hole.
Why can't I read data from a disk or play files? Confirm your computer is turned on.
Confirm the disk is inserted correctly.
Confirm the drive and file names are correct.
Confirm the disk is not stained or scratched.
Confirm the disk or files are supported.
Why doesn't a DVD video play smoothly? Ensure to use AC power.
Power management may be working. Disable it.
Why isn't the optical drive recognized? If your computer is turned on with a certain DVD video inserted in the drive, the drive may not be recognized. In this case, turn off your computer and open the disk tray by the way on Question: Why does not the drive open? on the previous page. Remove the DVD video from the drive; then turn on your computer again.
Why can't I communicate through the built-in modem? Confirm the telephone line is properly connected to the modem jack.
Confirm the dial setting (pulse or tone) of Windows XP and/or communication software is matched with the telephone line.
If you set your connection status using New Connection Wizard, check Use dialing rules in the Properties dialog box of that connection status. Refer to Internet Connection section of Chapter 5.
Confirm the country/region setting is appropriate.
Confirm the network configuration is appropriate.
Confirm the user name or password is correct.
Confirm the COM port in the communication software is set appropriately.
Turn off the power management in the Windows.
If an unusual device is attached to the line you are connecting to, the modem may not function properly. Remove the device or contact the dealer of the device.
If your computer is connected to a PBX, consult the PBX maintenance staff or its service company. If the electric characteristics of your PBX are different from those of a regular analog line, the modem will not function properly. If you connect the modem to a digital PBX, both the modem and the PBX may be damaged.
Why is the access speed so slow? Close the applications currently opened.
Try to connect another ISP (Internet Service Provider), or try to connect in some other time.
Why can't I access the LAN? Confirm the cable is properly connected to the LAN jack and the network hub.
Confirm the network configuration is appropriate.
Confirm the user name or the password is correct.
Why can't I communicate with other computers through a wireless LAN? Confirm each computer is enabled for wireless LAN.
Confirm Computer-to-computer (ad hoc) networks only is selected in Networks to Access of Advanced dialog box of each computer.
Adjust the distance between the computers by bringing your computer closer to others and remove any obstructions that may impede the communication; then, try to connect again.
Confirm the IP address, the subnet mask and the default gateway of each computer are set correctly.
Confirm the WEP key is correctly entered if the WEP security of other devices, which you want to communicate with, is enabled.
Why don't peripheral devices function? Confirm they are correctly connected to your computer.
Confirm they are Windows XP compliant.
Confirm drivers necessary for the devices are installed.
Why can't I print? Make sure the printer is turned on.
Check whether your computer and the printer are connected correctly.
Check whether the printer is ready to print.
Check whether the printer has enough paper.
Check whether the printer driver is installed.
Why don't peripheral devices function correctly? Set System standby/hibernate to Never in Power Options Properties dialog box. If this does not work, set Turn off hard disks to Never.
Confirm they are Windows XP compliant.
Confirm drivers necessary for the devices are installed.
Why is the battery pack discharged so quickly? Initialize the battery pack.
Why is the date and/or time incorrect? Correct the date and time in Windows. Double-click the time appearing on the taskbar and set them in Date and Time Properties dialog box.
Why can't I use a hardware device? Make sure the hardware device is not crossed out with an X mark using the following procedure.
1. Click start – Control Panel. Click Performance and Maintenance; then, System. If Classic view is selected, double-click System icon.
2. Click Hardware tab; then, Device Manager.
3. Double-click the device you cannot use and confirm Use this device (enable) appears in Device usage.
Why can't I produce sound? Turn the volume control on the left side of your computer backward to increase the output volume.
Click or double-click the speaker symbol on the taskbar and check the Windows volume.
Why can't I turn off my computer? Follow the instructions on Why doesn't the keyboard or the glide pad function?
Why my computer is so hot? When charging the battery pack, its surrounding area or the front of the keyboard may become hot, but this is not a problem.
Why can't I record the sound from the microphone? Follow the instructions below:
1. Double-click the speaker symbol on the taskbar.
2. Click Options and select Properties.
3. Select Recording in Adjust volume and confirm Microphone is checked in Show the following volume controls, then click OK.
4. Confirm Select is checked in Microphone of Recording Control dialog box.
5. Close the Recording Control dialog box.
Why can't find the drivers and applications? You may accidentally remove them. They are stored on the last recovery disk. When you are not sure how to install them or the CD does not have the drivers or applications, consult local service staff.
Privacy Policy