Brand: SHARP
Category: Office Equipment
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PN-LC862
Uploaded: Nov. 21, 2025, 7:07 p.m.
Warranty Information
Continuous operation is limited to 16 hours per day; exceeding this is not covered by warranty.
First Power-On: Follow on-screen prompts to set language, time zone, date, and time. Configure settings for "Operation mode" (Mode1 recommended for EcoDesign compliance, Mode2 for faster startup). The monitor enters standby mode after 5 minutes of no signal.
Powering On: Press the POWER button on the remote or monitor. The monitor enters standby mode. For complete disconnection, use the main power switch. Turning on requires waiting at least 5 seconds between power switch or button operations to prevent malfunctions.
Powering Off: Press the POWER button on the remote or monitor. A confirmation screen appears. Select "Power off" to enter standby state. Ensure applications are saved before powering off to avoid data loss.
Powering On: Press the POWER button on the remote or monitor. The monitor enters standby mode. For complete disconnection, use the main power switch. Turning on requires waiting at least 5 seconds between power switch or button operations to prevent malfunctions.
Powering Off: Press the POWER button on the remote or monitor. A confirmation screen appears. Select "Power off" to enter standby state. Ensure applications are saved before powering off to avoid data loss.
Troubleshooting and error codes
| Status | Status of the monitor |
|---|---|
| Blue lit | Power on, Sleep state (Backlight off) |
| Orange lit | Power off (Standby state*1) |
| Orange flashing (at approx. 2 seconds interval) | Power off (Standby state*2) |
| Orange flashing (at approx. 1 second interval) | Input signal waiting state |