Brand: SIEMENS
Category: Control Unit
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for A6V11402061
Uploaded: Nov. 21, 2025, 7:20 p.m.
Manual Publish Date: 2018-10-09
Warranty Information
No routine maintenance required. Annual check recommended. Unit is not field serviceable; return for repair.
Installation Instructions:
1. Ensure rough-in box is ready.
2. Connect terminations and tubing.
3. Slide unit into the wall.
4. Secure display with screws.
5. Re-zero sensor with display open and unit powered (Access Settings > Maintenance > Pressure Calibration, press Adjust Zero).
6. Align display and snap into place.
Maintenance:
Unit designed for indoor, clean, dry air. No routine maintenance required after installation. Annual calibration check recommended. Unit is not field serviceable; return for repair. Do not blow into pressure tubing or clean with industrial cleaners/solvents other than approved. Do not immerse.
Service:
To recalibrate or remove, use security holes at bottom of faceplate. Insert screwdriver, rotate 90 degrees to release snaps. Repeat for both holes.
1. Ensure rough-in box is ready.
2. Connect terminations and tubing.
3. Slide unit into the wall.
4. Secure display with screws.
5. Re-zero sensor with display open and unit powered (Access Settings > Maintenance > Pressure Calibration, press Adjust Zero).
6. Align display and snap into place.
Maintenance:
Unit designed for indoor, clean, dry air. No routine maintenance required after installation. Annual calibration check recommended. Unit is not field serviceable; return for repair. Do not blow into pressure tubing or clean with industrial cleaners/solvents other than approved. Do not immerse.
Service:
To recalibrate or remove, use security holes at bottom of faceplate. Insert screwdriver, rotate 90 degrees to release snaps. Repeat for both holes.