Brand: SIEMENS
Category: Control Unit
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for CCDA1445
Uploaded: Nov. 21, 2025, 7:11 p.m.
Manual Publish Date: 2009-08-20
Warranty Information
No explicit warranty period is stated in the provided pages.
- This manual provides information for installing and configuring the SIEMENS CCDA1445 High Speed Dome Camera.
- It details safety precautions, technical specifications, ordering information, package contents, and equipment description.
- Installation steps cover wiring the dome, installing various accessories like flush mounts, outdoor housings, wall mounts, and extension poles.
- Configuration instructions focus on setting up camera parameters, OSD menus, and pan/tilt functions.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| Dome camera falling down | Safety wire not engaged or incorrectly attached. | Ensure safety wire is engaged. Align notch with "OPEN" arrow and turn to "LOCKED" position. For outdoor housing, ensure safety wire is firmly attached to the mount. Check assembly by pulling. |
| Water entering outdoor housing | Improper mounting or sealing. | Use PG gland for mounts to ensure IP66. Use waterproof adhesive on connections. Ensure gland is fixed properly. |
| Damage due to overload (plug-type power supply) | Using a power supply unit with a rating less than 35 W. | Connect to a power supply that allows for at least 35 W consumption. |