Brand: SIEMENS
Category: Control Unit
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for RI 45 PIII
Uploaded: Nov. 21, 2025, 6:15 p.m.
The manual describes the RI 45 PIII system unit, covering its components, installation, and maintenance. Key sections include system unit overview, motherboard details, bus board functionality, CD-ROM drive, power supply, connecting cables, and SCSI options. It details procedures for removing and installing components, troubleshooting errors, and managing system configuration. Safety guidelines and copyright information are also provided.
Troubleshooting and error codes
| Error | Possible Cause | Solution |
|---|---|---|
| Device connected, but not ready | SCSI device not reacting to commands. | Switch 'Send Start Unit Command' to Yes in SCSI-Setup. If persistent, consult device documentation. |
| Start unit request failed | SCSI-BIOS unable to send power up command. | Set 'Send Start Unit Command' to No in SCSI-Setup. |
| Time-out failure during | Time limit exceeded. | Check SCSI bus termination. Disconnect SCSI cables, restart. If system starts, check cables and devices. |