Brand: SIEMENS
Category: Cooktop
Document Type: Installation Guide
Language: EN
Installation Guide for EC945RB91A
Uploaded: Nov. 21, 2025, 7:41 p.m.
Warranty Information
The appliance must not be tampered with or used inappropriately for the warranty to be valid.
Safety First: Always follow safety guidelines. If you smell gas, do not operate any electrical switches and leave the building to call for help.
Installation: Ensure all statutory requirements, local regulations, and manufacturer's instructions are met. An authorized technician must perform installation. Turn off gas and electricity before starting. Proper ventilation is crucial.
Operation: Familiarize yourself with burner locations and control knobs. Igniting burners involves pressing and turning the knob. Some models have a safety system (thermocouple) that prevents gas flow if the flame extinguishes.
Usage: Use appropriate pan sizes for each burner. Avoid unstable pans. Always cook with a lid. Clean the appliance after each use and ensure proper maintenance.
Troubleshooting: Refer to the provided table for common issues like electrical malfunctions, burner problems, or gas flow issues. Contact authorized service personnel for complex problems.
Troubleshooting and error codes
| Fault | Possible cause | Solution |
|---|---|---|
| The general electrical system is malfunctioning. | Defective fuse. The automatic safety switch or circuit breaker has tripped. | Check the fuse in the main fuse box and change it if it is damaged. Check the main control panel to see if the automatic safety switch or circuit breaker has tripped. |
| The automatic on function does not work. | There may be food or cleaning products stuck between the ignition sparkers and the burners. The burners are wet. | The space between the ignition sparker and the burner must be clean. Dry the burner covers carefully. |
| The burner flame is not uniform. | The burner covers are not correctly positioned. The appliance is not earthed, is not correctly connected or the earth wire is faulty. | Check that the covers are correctly positioned. Contact the electrical installer. |
| The flow of gas does not appear normal or no gas comes out. | The gas supply is blocked via intermediary valves. If the gas is supplied from a gas cylinder, check that this is not empty. | Open all intermediary valves. Change the gas cylinder. |
| The kitchen smells of gas. | A gas tap has been left on. There may be a leak in the gas cylinder coupling. | Turn off the gas taps. Check that the coupling is sound. |
| The safety valves on one of the burners are not working. | The control knob was not held down for long enough. The grooves on the diffuser are dirty. | Once the burner is lit, hold the control knob down a few seconds longer. Clean the grooves on the diffuser. |