Brand: SIEMENS
Category: Cooktop
Document Type: Manual
Language: EN
Manual for EH6..MK2, EH6..MD2, EH7..MD2, EH9..MD2
Uploaded: Nov. 21, 2025, 8:36 p.m.
Warranty Information
Contact after-sales service for repairs and product advice.
Overview of Operation
- Safety First: Always read safety warnings and advice before use. Keep children supervised.
- Hob Features: Familiarize yourself with the control panel, hotplates, and residual heat indicators.
- Basic Operation: Learn how to switch the hob on/off and set hotplate power levels (1-9).
- Cooking Guidelines: Use the provided table for recommended power levels and approximate cooking times for various foods.
- Special Functions: Explore the deep-frying function, frying programs, childproof lock, and Powerboost function.
- Time Programming: Utilize automatic switch-off for hotplates or the timer function.
- Maintenance: Clean the hob after each use and refer to troubleshooting for minor issues.
Troubleshooting and error codes
| Indicator | Malfunction | Measure |
|---|---|---|
| none | The electric power supply has been interrupted. | Use other electrical appliances to check if there has been a power cut. |
| none | The appliance has not been correctly connected following the connection diagram. | Make sure that the appliance has been connected correctly. |
| none | Electronic system malfunction. | If in the above checks, the malfunction is not resolved, contact the Technical Assistance Service. |
| E flashing | The control panel is wet or an object is resting on it. | Dry the control panel area or remove the object. |
| Er + number / + number | Electronic system malfunction. | Disconnect the hob from the mains. Wait 30 seconds or so, then connect it again.* |
| F0 / F9 | There is an internal error in the system. | Disconnect the hob from the mains. Wait 30 seconds or so, then connect it again.* |
| F2 | The electronic system has overheated and the corresponding hotplate has been switched off. | Wait until the electronic system has cooled down completely. Then press any symbol on the hob.* |
| F4 | The electronic system has overheated and all hotplates have been switched off. | Disconnect the hob from the mains. Wait 30 seconds or so, then connect it again.* |
| 01 | Supply voltage outside normal operating limits. | Please contact the local electricity board. |
| 02 / 03 | The hotplate has overheated and switched off to protect its working surface. | Wait until the electronic system has cooled down sufficiently before switching it back on. |