Brand: SIEMENS
Category: Dishwasher
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SN... SX...
Uploaded: Nov. 21, 2025, 7:28 p.m.
Warranty Information
In addition to warranty claims and appliance warranty, damages caused by a defective Aqua-Stop system will be covered for private users.
Intended Use: This appliance is intended for household use only, for washing domestic dishes.
Getting to know your appliance: Familiarize yourself with the control panel and interior layout.
Operating the appliance: Turn on the tap, switch on the appliance, select a programme, and press START.
Rinse Aid: Ensure the rinse aid indicator is lit and refill as needed for stain-free results.
Utensils: Load items securely, ensuring openings face down and spray arms are not obstructed.
Troubleshooting and error codes
| Fault | Cause | Remedial action |
| "Check water supply" display lights up. | Supply hose kinked. | Install supply hose without kinks. |
| Tap turned off. | Turn on the tap. | |
| Tap jammed or calcified. | Turn on the tap. | |
| Filter in the water supply blocked. | Switch off the appliance and pull out the mains plug. Turn off the tap. Unscrew water connection. Clean filter in the supply hose. Screw water connection on again. Check for leaks. Reconnect power supply. Switch on the appliance. | |
| Error code E:22 is lit. | Filters are soiled or blocked. | Clean filters. |
| Error code E:24 is lit. | Waste water hose is blocked or kinked. | Install hose without kinks, remove any residue. |
| Error code E:25 is lit. | Siphon connection still sealed. | Check connection to siphon and open if required. |
| Cover on the waste water pump loose. | Lock cover correctly. | |
| Error code E:27 is lit. | Waste water pump blocked or cover on the waste water pump is not locked in position. | Clean pump and lock cover correctly. |
| A different error code is indicated on the digital display. (E:01 to E:30) | A technical fault has probably occurred. | Switch off appliances with the ON/OFF switch. After a short time restart the appliance. If the problem recurs, turn off the tap and pull out the mains plug. Call customer service and mention the error code. |
| Display flashes | Door not closed properly. | Close the door. Ensure that no objects (utensil, fragrance dispenser) are protruding over the basket and preventing the door from closing. |
| Refill indicator for rinse-aid is lit. | No rinse aid. | Refill rinse aid. |
| Refill indicator for rinse-aid is not lit. | Refill indicator switched off. | Activation/deactivation (see chapter Rinse aid). |
| There is still enough rinse aid available. | Check refill indicator, level. | |
| Water is left in the appliance at the end of the programme. | Filter system or area under the filters is blocked. | Clean filters and area underneath (see Waste water pump). |
| The programme has not yet ended. | Wait until programme ends or reset (see Terminating the programme). |