Brand: SIEMENS
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for SN..., SX...
Uploaded: Nov. 21, 2025, 7:06 p.m.
Manual Publish Date: null
Warranty Information
The AQUA-STOP guarantee covers water damage if the system is defective, provided the appliance is correctly installed.
Getting to know your appliance
The control panel features an ON/OFF switch, programme buttons, a display for water supply status, salt and rinse aid refill indicators, timer programming, additional options, a START button, digital display, and a door opener.
Operating the appliance
The appliance offers various programmes and additional options. Ensure correct loading of utensils, add detergent and rinse aid as needed. The Aqua sensor optimizes cleaning based on water turbidity, and Zeolith drying uses a special mineral for efficient drying.Troubleshooting and error codes
| Fault | Cause | Remedial action |
|---|---|---|
| Utensils not dry. | No or too little rinse aid in the dispenser. | Refill rinse aid. |
| Programme selected without drying. | Select programme with drying (see "Overview of programmes", "Programme sequence"). | |
| Water collecting in depressions on the utensils and cutlery. | Arrange utensils in a sloping position, arrange affected utensils as sloping as possible. | |
| The combined detergent used has a poor drying performance | Use different combination detergent with better drying performance. Use of rinse aid also increases the drying performance. | |
| Intensive drying to increase drying not activated. | Activate intensive drying (see “Operating the appliance"). | |
| Utensils were removed too early or drying process had not ended yet. | Wait until program ends or wait until 30 min after program ends before removing utensils. | |
| Plastic utensils not dry. | Special properties of plastic. | Plastic has a lower heat storage capacity and therefore dries less well. |
| Cutlery not dry. | Cutlery not arranged properly in the cutlery basket. | Separate cutlery if possible, prevent contact points. |
| Cutlery not arranged properly in the cutlery drawer. | Arrange cutlery properly and separate if possible. | |
| Appliance interior wet after rinse cycle. | No appliance fault | On account of the “Condensation drying” principle, water droplets are physically induced and required in the container. The humidity in the air condenses on the inner walls of the dishwasher, drains and is pumped out. |