Manual for BE555LMS0

Manual for BE555LMS0

Brand: SIEMENS

Category: Microwave Oven

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:09 p.m.

Warranty Information

Detailed information on warranty period and terms is available from after-sales service, retailer, or website.

Basic Operation

Microwave: Select power level (90-900W) and cooking time. Press start. The appliance can be paused by pressing 'stop' or opening the door.

Grill: Set required cooking time and press start. Combines with microwave for faster cooking (MicroCombi).

Memory: Save frequently used settings by pressing 'M', setting parameters, and saving. Recall saved settings by pressing 'M' and then 'start'.

Programmes: Select pre-set programmes (P01-P08) for defrosting, cooking, or combi-cooking. Use 'P' to cycle through programmes, 'kg' to set weight, and then 'start'.

Basic Settings: Adjust settings like button tone and demo mode when the appliance is off by holding 'start' and 'stop'.

Troubleshooting and error codes

Fault Cause and troubleshooting
The appliance is not working.
  • Mains plug not plugged in. Connect to power supply.
  • Circuit breaker tripped. Check fuse box.
  • Power cut. Check other appliances.
  • Malfunction: Switch fuse off and on. If fault recurs, call after-sales service.
Food takes longer than usual to heat up.
  • Microwave power setting too low. Increase setting.
  • Larger amount of food. Set longer cooking time.
  • Food is colder than usual. Stir food during cooking.
Turntable grates or grinds.
  • Dirt or foreign objects in turntable drive area. Clean roller ring and recess.
Microwave mode is cancelled.
  • Appliance has a fault. Call after-sales service.
The appliance is not in operation. A cooking time is shown in the display.
  • Settings area activated accidentally. Press stop.
  • Start not pressed after setting. Press start or delete setting by pressing stop.
Three zeros flash on the display.
  • Power cut. Reset time.
An M is shown on the display. Demo mode is activated.
The message E 3 appears on the display.
  • Fault in automatic door opening system. Switch off/on appliance after 10 minutes. If fault recurs, call after-sales service.
Privacy Policy