Brand: SIEMENS
Category: Microwave Oven
Document Type: Manual
Language: EN
Manual for CM585AGS0
Uploaded: Nov. 21, 2025, 7:29 p.m.
Warranty Information
Refer to after-sales service, your retailer, or the website for warranty information.
Switching on the appliance: Turn the function selector to switch on the appliance.
Switching off the appliance: Turn the function selector to the off position.
Setting the type of heating and temperature: Use the function selector to set the heating type, then press ▶️/⏏︎ and use the rotary selector to adjust the temperature.
Pausing operation: Press ▶️/⏏︎ or open the appliance door. Press ▶️/⏏︎ to continue.
Stopping operation: Turn the function selector to the off position.
Rapid Heating: Set a heating type and temperature of at least 100 °C, press ⏩⏩, then press ▶️/⏏︎.
Microwave settings: Set the function selector to ≈, press ≈, then use the rotary selector to set the cooking time. Press ▶️/⏏︎ to start.
Troubleshooting and error codes
| Fault | Cause & Troubleshooting |
|---|---|
| The appliance is not working. | The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. The circuit breaker is faulty. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your kitchen or other appliances are working. Malfunction: 1. Switch off the fuse in the fuse box. 2. Switch the fuse back on after approx. 10 seconds. If the fault was a one-off, the message disappears. 3. If the message appears again, call the after-sales service. Please specify the exact error message when calling. "Customer Service", Page 35 |
| Appliance is not heating, colon is flashing in the display. | Demo mode is activated in the basic settings. 1. Disconnect the appliance from power supply by briefly switching off the circuit breaker in the fuse box. 2. Deactivate demo mode in the basic settings in the next 3 minutes. |
| Microwave operation is stopped. | Malfunction: 1. Switch off the fuse in the fuse box. 2. Switch the fuse back on after approx. 10 seconds. If the fault was a one-off, the message disappears. 3. If the message appears again, call the after-sales service. Please specify the exact error message when calling. "Customer Service", Page 35 |
| Food takes longer than usual to heat up. | The microwave power setting was too low. Select a higher microwave power setting. You have placed a larger amount of food than normal in the appliance. Set a longer cooking time. Double the amount needs double the cooking time. The food was colder than usual. Stir or turn the food during cooking. The door was not fully closed. Check whether food residue or debris is trapped in the door. ▷/ has not been pressed. Press ▶️/⏏︎. |
| The microwave does not work. | 12:00 flashes in the display and the symbol lights up. There has been a power cut. Reset the time. "Setting the time", Page 10 The appliance is not in operation. A cooking time is shown in the display. ▷/ has not been pressed. Press ▶️/⏏︎. |
| A message with "D" or "E" appears in the display, e.g. D0111 or E0111. | Malfunction: 1. Switch off the fuse in the fuse box. 2. Switch the fuse back on after approx. 10 seconds. If the fault was a one-off, the message disappears. 3. If the message appears again, call the after-sales service. Please specify the exact error message when calling. "Customer Service", Page 35 |
| The message E2 appears in the display. | The automatic safety cut-out function has been activated. Press any button. |
| The message E11 appears in the display. | Moisture in the control panel. Allow the control panel to dry. |