Manual for FI24

Manual for FI24

Brand: SIEMENS

Category: Refrigeration

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:06 p.m.

Warranty Information

Warranty is issued for the entire system, except disposable cartridges.

Switching the appliance on

Switch on the appliance with the On/Off button. The appliance begins to cool. Light is switched on when the door is open.

Operating tips

  • When the appliance has been switched on, it may take several hours until the set temperature has been reached.
  • The fully automatic NoFrost system ensures that the freezer compartment remains free of ice. Defrosting is not required.

Set the language

The display languages can be changed according to the table in the chapter "Special functions", "Setup mode".

Setting the temperature unit

The temperature can be displayed in degrees Celsius (°C) or degrees Fahrenheit (°F).

Setting the temperature

Freezer compartment (can be selected from -16 °C to -24 °C). We recommend a setting of -18 °C.

  • Activate the setup mode with the selection button <.
  • Set the desired temperature with the + (warmer) or - (cooler) setting buttons.

Troubleshooting and error codes

FaultPossible causeRemedial action
Appliance has no refrigeration capacity.Appliance has been switched off.Press the On/Off button.
Power failure.Check whether the power is on.
The light does not work.The fuse has been switched off.Check the fuse.
The display does not illuminate.The mains plug has not been inserted properly.Check whether the mains plug is secure.
The refrigeration unit is switching on more frequently and for longer.Appliance opened frequently.Do not open the appliance unnecessarily.
The ventilation openings have been covered.Remove obstacles.
Large quantities of fresh food are placed in the freezer.Activate super freezing.
The light (LED) does not work.The LED lamp is defective.Call customer service.
Light switch is jammed.Check whether it can be moved.
Display indicates “E..”.Electronics have detected a fault.Call customer service.
Display indicates “LOWPOWER”.The mains voltage falls below the permitted limiting value.When the mains voltage reaches the stipulated value again, the warning message goes out. If the warning message lasts for longer, inform the energy supply company.
Display indicates “HIGHVOLT”.The mains voltage exceeds the permitted limiting value.When the mains voltage reaches the stipulated value again, the warning message goes out. If the warning message lasts for longer, inform the energy supply company.
Privacy Policy