Brand: SIEMENS
Category: Refrigeration
Document Type: Manual
Language: EN
Manual for KI52L
Uploaded: Nov. 21, 2025, 6:18 p.m.
Warranty Information
Refer to your customer service, dealer, or website for warranty period and conditions.
Appliance Operation:
Switching on: Press the Taste 1 button. The appliance will start cooling.
Setting Temperature: Press the Taste °C button repeatedly until the desired temperature is displayed. The recommended temperature for the refrigerator compartment is +4 °C.
Super Function: Activate by pressing the Taste °C button. The indicator 'super' will light up. This function cools the refrigerator and freezer compartments more intensely.
Switching off: Press the Taste 1 button. The appliance will stop cooling.
Laying up: Ensure food is properly packaged to prevent drying out or odour transfer. Store fresh food in the refrigerator compartment and frozen food in the freezer compartment.
Switching on: Press the Taste 1 button. The appliance will start cooling.
Setting Temperature: Press the Taste °C button repeatedly until the desired temperature is displayed. The recommended temperature for the refrigerator compartment is +4 °C.
Super Function: Activate by pressing the Taste °C button. The indicator 'super' will light up. This function cools the refrigerator and freezer compartments more intensely.
Switching off: Press the Taste 1 button. The appliance will stop cooling.
Laying up: Ensure food is properly packaged to prevent drying out or odour transfer. Store fresh food in the refrigerator compartment and frozen food in the freezer compartment.
Troubleshooting and error codes
| Problem | Possible Cause and Solution |
|---|---|
| Temperature deviates significantly from setting. | Switch appliance off for 5 minutes. Check temperature after a few hours if too warm, or the next day if too cold. |
| No display lights up. | Check if the mains plug is correctly inserted. Check the fuse. Check if there is power. |
| Appliance does not cool, display and lights are on. | Demo mode is activated. Start appliance self-test. |